PLA Natural pellets
search
  • PLA Natural pellets
  • PLA Natural pellets 5kg
  • PLA Natural pellets
  • PLA Natural pellets
  • PLA Natural pellets 1kg
Compare
You must be logged in to manage your wishlist.

PLA Natural pellets

FILL-PELLETS-PLA-NAT-1KG
8.30 € 8.30 €
Tax excl.
Format
Colour
Quantity

In stock 20 units available for immediate shipping.
units available for shipping in 8 - 24 days Available for shipment within 8 - 24 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Tuesday 3 December
Available

The PLA Natural pellets by Fillamentum are a high quality FGF 3D printing material based on PLA Extrafill. The PLA Natural pellets are characterized by ease of printing, excellent interlayer adhesion and great surface quality and surface hardness of the 3D printed parts. The recommended processing temperature is 190-210 ºC.

These pellets were created sspecially for BAAM (Big Area Additive Manufacturing) and MAAM (Middle Area Additive Manufacturing) in mind. They can be extruded with the help of FGF manufacturing solutions such as the CEAD AM Flexbot, the CEAD E25 extruder, the Mahor V4 pellet extruder, or the Dyze Pulsar extruder. 

The quality of PLA Natural

Image 1: The quality of PLA Natural. Source: Fillamentum.

Since PLA is a 100% bio-based material, the PLA Natural pellets and parts 3D printed with them are fully biodegradable in industrial conditions. Industrial composting plants are usually more controlled than natural environments, and have the ideal pressure and temperature conditions for these materials to degrade in the shortest possible time.

General information
Manufacturer Fillamentum
Material PLA
Format 1 kg / 5 kg / 15 kg
Density 1.24 g/cm³

Electrical properties
Volumetric resistivity 10¹⁶ Ohm/cm

Mechanical properties
Elongation at break (ISO 527) 6 %
Tensile strength (ISO 527) 60 MPa
Tensile modulus (ISO 527) 3600 MPa
Flexural strength (ISO 178) 83 MPa
Flexural modulus (ISO 178) 3800 MPa
Surface hardness (ISO 7619) Shore 77 D
Impact strength 1.6 KJ/m²

Thermal properties
Melting temperature (ISO 11357) 155 ºC
Softening temperature - ºC
Processing temperature (ISO 306) 220 ºC
MFR Ratio (ISO 1133 @ 210 °C, 2.16 kg) 6 g /10 min
Glass transition temperature (ISO 11357) 55 ºC
Heat deflexion temperature - ºC

Other
HS Code 3901.1

The proper storage of 3D printing materials is key to smooth extrusion, and great surface quality and mechanical properties of the 3D printed part. The PLA Natural pellets should be stored in a closed package in dry conditions at temperature below 50 ºC, protected from UV-light at all times. If the pellets absorb excess moisture, they should be dried for 3 hours at 50 ºC. The recommended processing temperature for the PLA Natural pellets is 190 - 210 ºC.

Related products