1
  • $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • Taulman Alloy 910

    Taulman3D

    New product

    9 Items

    37,95 €tax excl.
    45,92 €tax incl.

    Ask for information
    It has high impact resistance and durability. It is termed as a high-performance nylon.

    Taulman Alloy 910 is a first filament for 3D printer manufactured from a polymer alloy having a high impact resistance and durability. This new strand Taulman 3D printing has a tensile strength of 8100 PSI just like the Taulman Copolyesters (Titan-bluPrint, Tech-G and T-Glase) but unlike them has a difference that is a nylon and therefore has increased durability.

    Taulman Alloy 910 is especially suitable for those applications in which it is put to the parts manufactured by 3D printing at elevated temperatures, high strength and durability needed for that part. Therefore considering the above features, the filament Taulman Alloy 910 is indicated for use in the manufacture of molds, components of robots or other machinery. In short, any application requiring high tensile strength and durability.

    With chemistry Taulman Alloy 910 has a capacity of very low water absorption compared with other filament family of Nylon Taulman. It is the perfect filament for 3D printing of high performance.

    In the following article you can see the main differences of nylon Taulman 3D filaments.

    For the use of filament Taulman 910 Alloy recommended speeds configuration similar to that used to print print ABS. Printing temperature should be between 250 and 255°C. Is recommended hot bed at a temperature of 50-65ºC, and as printing surface we recommended use BuildTak or crystal with 3Dlac.

    It is the perfect filament for 3D printing of high performance. It is a high quality filament that is easy to print, making it ideal for applications such as industrial and robotic parts.

    General information
    ManufacturerTaulman (USA)
    MaterialNylon Alloy 910
    FormatPack of 50 g
    Spool of 0.45 kg
    Density1.25 g/cm3
    Diameter of filament 1.75 or 2.85 mm
    Diameter tolerance ±0,05 mm
    Filament length ±149 m (Ø 1.75 mm-0.45Kg)
    ±56 m (Ø 2.85 mm-0.45Kg)
    ColorNatural / Clear
    RAL/Pantone-
    Print settings
    Printing temperature 250-255ºC
    Print bed temperature 30-60ºC
    Chamber temperature Not necessary (Recommended 30-100ºC)
    Cooling fan Recommended
    Mechanical properties
    Izod impact strength-
    Charpy impact strength -
    Elongation at break 32%
    Tensile strength55 MPa
    Tensile Modulus502 MPa
    Flexural strength -
    Flexural modulus-
    Surface hardness -
    Thermal properties
    Softening temperature82ºC
    Melting temperature 210ºC
    Specific properties
    Transparency Low (30%)
    FDA certification Yes 
    Inflammability (UL 94 HB)Yes 
    Additional Information
    HS Code3916.9
    Diameter coil (outer) 200 mm 
    Diameter coil (inner hole) 50 mm 
    Coil Width 50 mm 


    * The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

    11 other products in the same category: