Nylon Taulman 618 Natural

New product

12 Items

23,70 €
23,70 €

-5%

24,95 €

Ask for information
You can print resistant parts and the flexible and elastic time later recover its original shape.

Nylon or polyamide (PA) is a very usual synthetic plastic in a wide range of products. But, in this case, it is about a nylon suitable for being used in 3D printers.

With Taulman 618 nylon you will obtain flexible but resistant objects. Besides, by using clothing dye, colour can be directly applied on this filament. In this way, figures in many combined colours can be obtained.

In the following article you can see the main differences of nylon Taulman 3D filaments.

Nylon 618 Data Sheet_EN

Nylon 618 Data sheet in English

Download (181.28k)

It is advisable that the printer dock is warm with placing BuilTak or Kapton Tape for which adheres well and thus achieve a better result print (Minimize the most of the warping effect). The recommended temperature of 245 ° C extruder is.



During the printing process can you see smoke coming from the extruder, do not panic, it's just water vapor. This is because the nylon has a great capacity to absorb moisture. For this reason we recommend that after use in your 3D printer save your spool nylon bag with the absorbent silica in the original bag. Close the bag so that it is the best possible sealed and store in a dry place.


  • Plastic Type: Nylon (PA)

  • Colour: Natural

  • Transparency: 91% Opacity

  • Diameter: 1.75mm or 2.85 mm

  • Nozzle temperature: 245 °C

  • Printing base temperature: 30-65ºC

  • Net Weigth: 450gr

  • Maximum elongation: 86%

  • Tensile Stress "PSI": 4,575

  • Food use: Not approved

  • Flammability: Yes (UL 94 HB)

  • Spool diameter: 130mm

  • Spoool Width: 70mm

  • Inside hole diameter: 19mm

  • Shipping Weight: 0.75Kg

  • Shipping Dimensions: 135x135x80mm

  • HS Code: 3916.9

9 other products in the same category: