Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesNanovia PA-6 Rail is a very easy to print filament, composed of polyamide (nylon) and flame retardant ceramic, certified by the NF EN 45545-2 standard for fire protection of railway vehicles, due to its non-flammability, low smoke emission and absence of toxics.
Nanovia PA Rail is suitable for the production of objects intended for high-risk environments, it is designed for the railway sector, and with it it is possible to create parts resistant up to 100ºC.
The advantages of the PA Rail filament include:
Possible applications for PA Rail filament are:
It is recommended to print Nanovia PA Rail in a room with air extraction or using suitable ventilation equipment.
The print profiles for the Nanovia PA Rail filament are available on the Ultimaker Cura slicer website.
Further information, technical and safety data can be found in the "Downloads" section.
General information | |
---|---|
Manufacturer | Nanovia |
Material | PA Rail |
Format |
Spool of 500g |
Density | 1.49 g/cm3 |
Diameter of filament | 1.75 or 2.85 mm |
Diameter tolerance | ±0,05 mm |
Filament length | |
Color | Black |
RAL/Pantone | - |
Print settings | |
Printing temperature | 260-280 ºC |
Print bed temperature | 70-80 ºC |
Chamber temperature | - |
Cooling fan | - |
Recommended nozzle | >0.5 mm |
Mechanical properties | |
Izod impact strength | - |
Charpy impact strength | - |
Elongation at break (ISO 527) | 1.2 % |
Tensile strength (ISO 527) | 55 MPa |
Tensile Modulus | - |
Flexural strength | - |
Flexural modulus | - |
Surface hardness | - |
Thermal properties | |
Softening temperature (ASTM E2092) | - |
Melting temperature | - |
Specific properties | |
Transparency | - |
Brightness value | - |
Additional Information | |
HS Code | 3916.9 |
Diameter coil (outer) | - |
Diameter coil (inner hole) | - |
Coil Width | - |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
53,95 €
132,95 €
59,95 €
68,00 €
175,00 €
140,00 €
41,25 €
68,00 €
175,00 €
170,00 €
175,00 €
165,00 €
110,00 €
95,00 €
145,00 €
175,00 €
189,99 €
209,00 €
33,45 €
175,00 €
146,00 €
44,00 €
75,95 €
50,95 €
40,00 €
169,00 €
42,72 €