

Nanovia PA-6 Rail is a very easy to print filament, composed of polyamide (nylon) and flame retardant ceramic, certified by the NF EN 45545-2 standard for fire protection of railway vehicles, due to its non-flammability, low smoke emission and absence of toxics.
Nanovia PA Rail is suitable for the production of objects intended for high-risk environments, it is designed for the railway sector, and with it it is possible to create parts resistant up to 100ºC.
The advantages of the PA Rail filament include:
Possible applications for PA Rail filament are:
It is recommended to print Nanovia PA Rail in a room with air extraction or using suitable ventilation equipment.
General information |
|
Material | PA |
Format | 0.05 / 0.5 kg |
Density | 1.49 g/cm³ |
Filament diameter | 1.75 / 2.85 mm |
Filament tolerance | ± 0.05 mm |
Filament length | - |
Mechanical properties |
|
Elongation at break | (ISO 527) 1.2 % |
Tensile strength | (ISO 527) 55 MPa |
Tensile modulus | 6000 MPa |
Flexural strength | - MPa |
Flexural modulus | - MPa |
Surface hardness | - |
Printing properties |
|
Printing temperature | 260 - 280 ºC |
Print bed temperature | 70 - 80 ºC |
Chamber temperature | - |
Cooling fan | - |
Recommended printing speed | - mm/s |
Recommended nozzle diameter | > 0.5 mm |
Thermal properties |
|
Softening temperature | - ºC |
Specific properties |
|
Chemical resistance | ✓ |
Other |
|
HS Code | 3916.9 |
Spool diameter (outer) | - mm |
Spool diameter (inner hole) | - mm |
Spool width | - mm |
The print profiles for the Nanovia PA Rail filament are available on the Ultimaker Cura slicer website.
Further information, technical and safety data can be found in the "Downloads" section.