Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesPolyamide 6 (PA6) is the most common extruded polyamide. It is known in industry for its good damping properties and impact resistance, as well as good toughness at low temperatures. It is ideal for bearings and gears, for example, as they would run quietly.
This material, developed by Nanovia, combines mechanical, thermal and chemical resistance.
The PA6 filament does not incorporate recycled or recovered material. Thanks to these qualities, PA6 filament is perfect for 3D printing, achieving high print quality.
PA-6, also known as nylon, is widely used in the automotive industry. It is also used for functional prototypes, hinges and even gears.
PA6 has a high sensitivity to moisture and must be kept in dry conditions at all times. For optimal results, it is recommended that you read the product's usage tips.
PA6 filament is designed for the best 3D printing results.
Hide color variations | (Hide color variations) |
It must be taken into account that PA6 is a material with a certain difficulty in printing, due to the warping effect it can generate.
PA6 is a very hygroscopic material, so it is advisable to store PA6 pellets in an airtight bag or use desiccant bags to prevent them from absorbing moisture. If the pellets have moisture in them, the filament that is manufactured may contain small imperfections that can negatively affect the final result.
General information | |
---|---|
Manufacturer | Nanovia |
Material | PA6 |
Format | 500 g spool |
Density | 1.14 g/cm3 |
Filament diameter | 1.75 mm or 2.85 mm |
Diameter tolerance | - |
Filament length | - |
Color | Translucent |
RAL/Pantone | - |
Printing properties | |
Printing temperature | 240 - 270 ºC |
Base/bed temperature | 80 - 100 ºC |
Chamber temperature | 60 ºC |
Layer fan | - |
Recommended print speed | 20-60 mm/s |
Recommended nozzle outlet diameter | - |
Mechanical properties | |
Izod impact resistance (ISO 180-1A) | 5 kJ/m2 |
Charpy impact resistance | 6 kJ/m2 |
Elongation at break (ISO 527) | >50 % |
Tensile strength (ISO 527) | 51 MPa |
Tensile modulus (ISO 527) | 2100 MPa |
Flexural strength (ASTM D790) | 85 MPa |
Flexural modulus (ISO 178) | 1650 MPa |
Surface hardness | - |
Thermal properties | |
Softening temperature (ISO 75) | |
Melting temperature | 205 °C |
Specific properties | |
Flammability classification UL94 | - |
Additional information | |
HS Code | 3916.9 |
Spool diameter (outside) | - |
Spool diameter (inner bore) | - |
Reel width | - |
* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.
53,95 €
132,95 €
59,95 €
68,00 €
175,00 €
140,00 €
41,25 €
68,00 €
175,00 €
170,00 €
175,00 €
165,00 €
110,00 €
95,00 €
145,00 €
175,00 €
189,99 €
209,00 €
175,00 €
146,00 €
57,75 €
44,00 €
75,95 €
50,95 €
40,00 €
169,00 €
42,72 €