Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

PA6

Ref.: PA6-NANOVIA-175-500

35.45 €

Tax excl.

Diameter

Format

Quantity

In stock 6 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 16 September

Available

Returns

Ask about this product

Polyamide 6 (PA6) is the most common extruded polyamide. It is known in industry for its good damping properties and impact resistance, as well as good toughness at low temperatures. It is ideal for bearings and gears, for example, as they would run quietly.

This material, developed by Nanovia, combines mechanical, thermal and chemical resistance.

The PA6 filament does not incorporate recycled or recovered material. Thanks to these qualities, PA6 filament is perfect for 3D printing, achieving high print quality.

PA-6, also known as nylon, is widely used in the automotive industry. It is also used for functional prototypes, hinges and even gears.

PA6 has a high sensitivity to moisture and must be kept in dry conditions at all times. For optimal results, it is recommended that you read the product's usage tips.

PA6 filament is designed for the best 3D printing results.

General information
Material	PA
Format	0.05 / 0.5 kg
Density	1.14 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	- mm
Filament length	-

Printing properties
Printing temperature	240 - 270 ºC
Print bed temperature	80 - 100 ºC
Chamber temperature	60 ºC
Cooling fan	-
Recommended printing speed	20 - 60 mm/s

Mechanical properties
Izod impact strength	(ISO 180) 5 KJ/m²
Charpy impact strength	(ISO 179) 6 KJ/m²
Elongation at break	(ISO 527) > 50 %
Tensile strength	(ISO 527) 51 MPa
Tensile modulus	(ISO 527) 2100 MPa
Flexural strength	(ISO 178) 85 MPa
Flexural modulus	(ISO 178) 1650 MPa
Surface hardness	-

Thermal properties
Melting temperature	205 ºC
Softening temperature	- ºC

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

It must be taken into account that PA6 is a material with a certain difficulty in printing, due to the warping effect it can generate.

PA6 is a very hygroscopic material, so it is advisable to store PA6 pellets in an airtight bag or use desiccant bags to prevent them from absorbing moisture. If the pellets have moisture in them, the filament that is manufactured may contain small imperfections that can negatively affect the final result.