Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Smart Clean Filament

Ref.: CLEAN-SMF-175-330

11.20 €

Tax excl.

Diameter

Format

Volume discounts

Quantity	Discount	Price
10	10% 10%	10.08 € 10.08 €
15	12% 12%	9.86 € 9.86 €

Quantity

In stock 12 units available for immediate shipping.
units available for shipping in 7 - 10 days Available for shipment within 7 - 10 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 3 July

Available

Returns

Ask about this product

Smart Clean Filament (1.75mm or 2,85mm) is developed to clean the extruder 3D printer to complete.

This Smart Clean filament removes residual material being left inside the extruder, and can be applied in the transition between two different materials are extruded at different temperatures, or when you finish printing.

Increasingly special filaments that are being used in 3D printing. Some of them are composed of several components (A polymer more finely a granular material to provide a new properties or finishing techniques to a filament). For example, the wood filament LayWoo-D3, ceramic filament LayBrick, the Reflect-Lay or the carbon fiber filament, etc). By using these filaments it is highly recommendable to finish printing using Smart Clean cleaning Filament (1.75mm or 2,85mm) to remove all traces of polymer that can become deposited inside the extruder.

This filament cleaning is one of the basic elements for 3D printing maintenance. As Filaments Cleaner that helps the dirt that adheres to the filament (dust, etc.) do not enter into the extruder, the filament Smart Clean cleaning helps increase the life of hotend 3D printer.

Each plastic has characteristics of extrusion determined by what sometimes to change the print of a filament by another lower extrusion temperature, lowering immediately the temperature extrusion at the lower temperature will be remnants of the previous plastic (And most Tª extrusion, which are not now extrude) into the extruder, causing partial clogs. The clearest example is the change print ABS (± 240 ° C) to PLA (± 210 ° C); The remains of ABS remaining inside the extruder not print correctly will soften the PLA, which will cause that part inside the extruder is obstructed.

Smart Clean filament (1.75mm or 2,85mm) has excellent thermal stability and has a suitable viscosity to drag the material causing the blockage of the extruder and it is not easy degradation.

Therefore, it is advisable to clean the filament each time you change material or otherwise at a rate of two weeks, in order to ensure that flow is smooth and continuous, and also to extend the life of the extruder will ensure better printing precision.

Smart_Clean_Filament2print

General information
Material	PLA
Format	50 g / 330 g
Density	1.1 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	(Ø 1.75 mm) ±0.03 mm / (Ø 2.85 mm) ±0.05 mm
Filament length	(Ø 1.75 mm-0.33Kg) ±124 m / (Ø 2.85 mm-0.33Kg) ±47 m

Printing properties
Printing temperature	180-260 ºC
Print bed temperature	40 ºC
Chamber temperature	✗
Cooling fan	-
Recommended printing speed	- mm/s

Mechanical properties
Elongation at break	- %
Tensile strength	- MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	-

Thermal properties
Softening temperature	- ºC

Specific properties
Transparency	-

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	53 mm
Spool width	55 mm

Using the Smart Clean filament is very simple. You only should consider the extrusion temperature. Just be heated extruder 10 °C than the temperature of the latter material has been printed and extrude a certain amount of filament (> 1 meter). If for example you printed ABS should set the printing temperature about 250 to extrude the filament Smart Clean cleaning.

After a certain amount extrude Strand Smart Clean cleaning should be removed from the extruder and load the new strand.