Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesWarning: Last items in stock!
Availability date:
The SuperVolcano hotend is developed for high-speed large prints. Compared to the E3D V6 hotends, the SuperVolcano has a volumetric performance up to 11 times higher, resulting in significant time savings.
The heater block of the Hotend SuperVolcano is made of nickel-plated copper, designed to remain intact even at high temperatures and long printing times. In addition, it has a high-temperature glass fibre sheath to insulate the block and facilitate thermal performance.
The SuperVolcano Hotend reaches 285 ºC, although it can be modified by means of a PT100 or Thermocouple sensor, reaching up to 400 ºC. This modification allows 3D printing with advanced materials such as PEEK, PEKK or PEI Ultem among others, widely used in industrial applications.
The SuperVolcano Hotend works with large nozzles, from 0.6 mm to 1.4 mm, which are available in brass or hardened steel. Based on studies and tests carried out by E3D, it has been concluded that the use of a 1.0 mm nozzle offers the best balance between speed and detail.
As well as enabling faster print speeds, the large exit diameter nozzles allow for a larger printed surface area which improves layer adhesion and adhesion to the base, greatly reducing the chances of warping.
SuperVolcano is compatible with the entire E3D range, allowing you to upgrade to Hotends V6, Titan Aero, Titan Aqua or Hemera for bigger and faster 3D prints than ever before.
Hide color variations | (Hide color variations) |
After 3D printing with filaments containing carbon, metallic, wood, ceramic fibres, etc., the filament must be removed and the Smart Clean cleaning filament inserted to avoid subsequent clogging.
To assemble the parts of the original E3D SuperVolcano, the following steps must be followed:
For more details on the assembly, please see the following link.
After mounting the original E3D SuperVolcano on the 3D printer, the height of the z-axis must be adjusted, as this installation increases the distance of the HotEnd by several centimetres.
Manufacturer | E3D |
---|---|
Type | SuperVolcano |
Filament diameter | 1.75 or 2.85 mm |
Nozzle diameter | 0.6 mm, 0.8 mm, 1.0 mm, 1.2 mm. 1.4 mm |
Maximum printing temperature |
285 ºC |
Kit content |
1 x Plated copper heater block 1 x Mosfet wires (12V only) |
HS Code | 8477.9 |
82,64 €
112,95 €
99,95 €
149,00 €
329,90 €
61,90 €
149,90 €
89,95 €
80,00 €
9,99 €
44,00 €
99,95 €
9,90 €
369,99 €
249,99 €
224,99 €
89,95 €
89,95 €
139,00 €
106,90 €
104,95 €
89,95 €
388,00 €
248,00 €
178,00 €
89,95 €
176,84 €
20,08 €
92,52 €
35,52 €