You must be logged in to manage your wishlist.
Zortrax Z-HIPS
ZORTRAX-ZHIPS-BLACK-800
44.00 €
Tax excl.
Zortrax is a Polish company founded in 2013 and focused on the development of professional 3D printing systems. Its main strength is the excellent optimisation and integration between its 3D printers, materials and software. This greatly simplifies the entire printing process, minimising set-up times and reducing the likelihood of failure to a minimum, making them ideal systems for professional environments.
Zortrax offers a wide range of technical materials perfectly optimised for best results in conjunction with its LPD printers, including ABS, ASA, PCABS, Nylon, HIPS and others.
Z-HIPS is a high impact polystyrene filament additivated to provide a semi-matt finish. It is a filament developed for the production of functional prototypes for product validation prior to production.
Image 1: Motorcycle tank printed on Z-HIPS. Source: Zortrax.
Its semi-matt finish, together with the excellent surface quality, provides finishes similar to those of mass-produced parts, which reduces post-processing times.
Image 2: Z-HIPS printed helmet. Source: Zortrax.
This filament is especially recommended for the production of components with large flat surfaces, architectural models, housings or the production of small series of final components.
Image 3: Speaker printed on Z-HIPS. Source: Zortrax.
Z-HIPS has low shrinkage, which gives it high dimensional stability. It also stands out for its high impact resistance and durability.
General information |
|
| Material | HiPS |
| Format | 800 g / 2 kg |
| Density | (ISO 1183) 1.136 g/cm³ |
| Filament diameter | 1.75 mm |
| Filament tolerance | - mm |
| Filament length | ± 292 m / ± 732 m |
Printing properties |
|
| Printing temperature | 240 ºC |
| Print bed temperature | 80 ºC |
| Chamber temperature | ✗ |
| Cooling fan | - |
| Recommended printing speed | - mm/s |
Mechanical properties |
|
| Izod impact strength | (ISO 180) 4.82 KJ/m² |
| Elongation at break | (ISO 527) 7.75 % |
| Tensile strength | (ISO 527) 16.9 MPa |
| Tensile modulus | - MPa |
| Flexural strength | (ISO 178) 29.3 MPa |
| Flexural modulus | (ISO 178) 1180 MPa |
| Surface hardness | (ISO 868) Shore 73 D |
Thermal properties |
|
| Softening temperature | - ºC |
Specific properties |
|
| Transparency | - |
Other |
|
| HS Code | 3916.9 |
| Spool diameter (outer) | - mm |
| Spool diameter (inner hole) | - mm |
| Spool width | - mm |
The use of the HEPA cover is recommended when printing large parts with Z-HIPS. This filament is not designed as a support material with ABS or ASA, for this purpose it is recommended to use the Z-SUPPORT ATP filament.
Featured properties
Printing temperature
240 ºC
Filament diameter
1.75 mm
Density
1,136 g/cm³
Related products
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
HIPS filament additivated to provide a semi-matt and high quality finish.