Liqcreate Model Pro Grey resin


This product could be delivered in a period exceeding the standard.

New product

46,95 €
46,95 €

Ask for information

High accuracy dental resin for the 3D printing of dental models and aligner models.

The Dental Model Pro Grey resin from the Liqcreate catalog of dental 3D printing resins is a high accuracy opaque grey low odor resin compatible with many resin 3D printers within the 385-420 nm range, including brands such as Anycubic, Phrozen and Creality. The full list of compatible equipment can be consulted here.

Video 1: The Liqcreate Dental Model Pro resin line. Source: Liqcreate.

The Dental Model Pro Grey resin, developed and validated in collaboration with dental companies and professionals, is ideal for the manufacturing of dental models and aligner models. Dental models 3D printed with this resin exhibit excellent dimensional stability and low shrinkage, and allow to achieve high detail and an aesthetically pleasing matte surface.

A dental model 3D printed with the Dental Model Pro Grey resin

Image 1: A dental model 3D printed with the Dental Model Pro Grey resin. Source: Liqcreate.

The matte surface accentuates depth and detail in dental models, which facilitates a perfect view on undercuts and makes the surface is ideal for scan impressions. Furthermore, the Dental Model Pro Grey resin is optimized to tolerate high thermoforming temperatures, which further increases its versatility of uses.

Elongation at break (%) 4.1
Tensile strength (MPa) 49
Tensile modulus (MPa) 2300
Flexural strength (MPa) 89
Flexural modulus (MPa) 2400
Surface hardness 9

The post-processing workflow for the Dental Model Pro Grey resin is quite user-friendly. First, the 3D printed part has to be cleaned for a maximum of 6 minutes in Liqcreate Resin Cleaner, IPA alcohol or bioethanol, preferably ultrasonic or under agitation. Then the completely dried part has to be cured in a high-power UV curing chamber. The curing workflow is explained in detail by the manufacturer here. It absolutely crucial that the parts are dry before they are cured. The curing of wet or sticky parts will lead to mechanical and surface defects. The drying can be done by simply leaving the cleaned part in a well ventilated area for at least 30 minutes or with the help of pressurized air (2 minutes) for parts cleaned in IPA alcohol or ethanol.

The Liqcreate resin bottles should be stored in a clean and dry environment, out of direct sunlight and in a temperature of 5-30 ºC. Before use, the resin bottle should be shaken energetically for at least 1 minute (at least 3 minutes in the case of filled resins). Once shaken, the resin should be left to rest for around 10 minutes to let the air bubble escape. Leftover resin can be poured back into the bottle but it should be first filtered to ensure there is no polymer residue present. Safety equipment such as protective garments, gloves and face protection is highly recommended for the handling of resin.

General information
Manufacturer Liqcreate
Technology  SLA/DLP/MSLA
Material Photopolymer
Wavelength UV 385-405 nm
Format 0.25 kg
1 kg
Color Opaque grey
Compatible 3D printers List of compatible resin 3D printers
Printing properties
Layer height 25-100 µm
Layer exposure time -
Layer cooling time-
Lifting height-
Exposure of bottom layers-
Number of bottom layers-
Curing and washing properties
Washing time 4-5 min (IPA, Liqcreate Resin Cleaner, bioethanol or ultrasonic bath)
Curing time Curing settings
Curing temperature -
Mechanical properties
Izod impact resistance¡ -
Charpy impact resistance -
Elongation at break (ASTM D638M) 4.1 %
Tensile strength (ASTM D638M) 49 MPa
Tensile modulus (ASTM D638M) 2300 MPa
Flexural strength (ASTM D790M) 89 MPa
Flexural modulus (ASTM D2240) 2400 MPa
Surface hardness (ASTM D2240) Shore 85D
Thermal properties
Softening temperature -
Brightness value -
Additional information
Service life -
HS Code 2916.1

* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.


30 other products in the same category: