P-Support 279
search
Compare
You must be logged in to manage your wishlist.

P-Support 279

PPPRINT-P-SUPPORT-175-600
105.00 € 105.00 €
Tax excl.
Diameter
Format
Colour
Quantity

In stock 2 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 27 December
Available

PPprint, a German manufacturer of materials and accessories for polypropylene 3D printing, has developed a new support filament specifically designed for compatibility and use with PPprint 721 filament.

Polypropylene is a material that often presents great difficulties when being 3D printed. This is due to its lack of adhesion to other materials, its high coefficient of thermal expansion, and the need for a controlled environment. PPprint 721 filament largely avoids all of these problems associated with 3D printing polypropylene.

By using PPprint 721 filament, the user can achieve functional end parts with good tear strength, chemical resistance, non-hygroscopic and translucent characteristics, which are ideal for making complex parts.

There are certain limitations to making complex parts with FDM 3D printing. If you have a dual extruder 3D printer, most FDM 3D printing materials can be combined with some support material to make complex parts.

However, polypropylene filament often does not perform optimally with these support materials, which is why PPprint has developed P-Support 279.

Video 1: How to remove 3D printed media with P-Support 279. Source: PPprint.

P-Support 279 is the first support material specifically developed for use in combination with polypropylene. This support filament enables the 3D printing of complex structures with bridges, cantilevers and openings. This material is characterised by its high stiffness, low warpage and excellent adhesion to both the 3D printed PP part and the specific printing surface P-Surface 141. Having a high adhesion to the printing base, this support material is highly recommended for the manufacture of Raft and support structures.

Part printed with PPprint 721 y P-Support 279

Image 1: Part printed with PPprint 721 and P-Support 279. Source: PPprint.

The support material printed with P-Support 279 can be removed cleanly and easily after heating the entire workpiece to 100 °C. Thus, this support material does not produce waste like other support materials. In addition, it is recyclable, which makes 3D printing of polypropylene with PPprint materials sustainable.

Due to its properties, PPprint P-Support 279 filament is a more than recommendable material for those users who own a dual extruder 3D printer and are used to print PPprint 721 polypropylene filament.

General information
Material PP
Format 600 g
Density 0.98 g/cm³
Filament diameter 1.75 / 2.85 mm
Filament tolerance ± 0.10 mm
Filament length (Ø 1.75 mm-0.6Kg) ±254 m / (Ø 2.85 mm-0.6Kg) ±96 m

Printing properties
Printing temperature 200 - 220 ºC
Print bed temperature 50 - 80 ºC
Chamber temperature ✗
Cooling fan -
Recommended printing speed 15 - 40 mm/s

Mechanical properties
Elongation at break - %
Tensile strength - MPa
Tensile modulus - MPa
Flexural strength - MPa
Flexural modulus - MPa
Surface hardness -

Thermal properties
Softening temperature - ºC

Specific properties
Transparency -

Other
HS Code 3916.9
Spool diameter (outer) 200 mm
Spool diameter (inner hole) 55 mm
Spool width 50 mm

The P-Support 279 filament requires an extrusion temperature of 200 - 220 °C and a bed temperature of 50 - 70 °C.

If the part of the piece printed with P-Support is in contact with P-Surface 141, the printing bed must be heated to 100 - 110 ºC in order to easily peel off the lower layers of the part.

To remove the supports from the workpiece, the entire workpiece can be heated to about 100°C or immersed in boiling water. Once this temperature is reached, the supports can be easily removed. Due to the high temperature, supports made of P-Support 279 have a chewy consistency, which allows the removal of material from hard-to-reach areas.

It should be noted that the use of high temperature resistant protective clothing is required for this operation.

Featured properties

Printing temperature
200 - 220 ºC
Filament diameter
1.75 / 2.85 mm
Density
0,98 g/cm³

Related products