Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Zortrax Z-PETG

Ref.: ZORTRAX-ZPETG-800G-BLACK

44.00 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 4 units available for immediate shipping.
units available for shipping in 4 - 8 days Available for shipment within 4 - 8 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 16 September

Available

Returns

Ask about this product

Zortrax is a Polish company founded in 2013 and focused on the development of professional 3D printing systems. Its main strength is the excellent optimisation and integration between its 3D printers, materials and software. This greatly simplifies the entire printing process, minimising set-up times and reducing the likelihood of failure to a minimum, making them ideal systems for professional environments.

Zortrax offers a wide range of technical materials perfectly optimised for best results in conjunction with its LPD printers, including ABS, ASA, PCABS, Nylon, HIPS and others.

Z-PETG is a PET filament combined with glycol to eliminate the brittleness of PET. The result is a material with increased durability and tensile strength. It is an industrial grade material designed to perform under extreme working conditions.

spring

Image 1: Spring printed with Z-PETG. Source: Zortrax

It is resistant to oils, fats, greases, salts, acids, caustics and many solvents, immune to UV radiation and has exceptional durability. It also has high impact resistance. This makes it an ideal material for industrial components and chemical environments.

oil

Image 2: Oil bottle printed with Z-PETG. Source: Zortrax

Its low shrinkage and absence of warping give it a high dimensional stability, which together with its good compatibility with the soluble filament Z-Support Premium facilitates the manufacture of components with complex geometries with high precision.

Z-PETG is available in 800 g and 2 kg formats and in grey and black colours.

General information
Material	PETG
Format	800 g
Density	(ISO 1183) 1.29 g/cm³
Filament diameter	1.75 mm
Filament tolerance	- mm
Filament length	-

Printing properties
Printing temperature	240 ºC
Print bed temperature	80 ºC
Chamber temperature	-
Cooling fan	-
Recommended printing speed	- mm/s

Mechanical properties
Izod impact strength	(ISO 180) 3.27 KJ/m²
Elongation at break	(ISO 527) 6.39 %
Tensile strength	(ISO 527) 40.18 MPa
Tensile modulus	1500 MPa
Flexural strength	(ISO 178) 55.3 MPa
Flexural modulus	(ISO 178) 1390 MPa
Surface hardness	(ISO 868) Shore 71.4 D

Thermal properties
Softening temperature	78 ºC

Specific properties
Transparency	-
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

Z-PETG filament is moderately hygroscopic. In case the filament contains more moisture than it should, it is recommended to dry the filament at a temperature of 70 °C for approximately 8 h.