You must be logged in to manage your wishlist.
These aluminum-filled nylon 12 pellets are a FGF 3D printing material used for direct extrusion or filament production. The aluminum-filled PA12 pellets have a particle size of 0.05-0.10 mm. The metallic gray powder imitates a metallic finish, characterized by its high rigidity.
A unique feature of this material is the very small size of the particles, which makes the pellets look like powder. However, these PA11 blue pellets are intended for FGF 3D printing and cannot be used in SLS 3D printing equipment, as there is a risk of damaging the SLS 3D printer.
The best equipment for processing the PA12 pellets is the Mahor V4 pellet extruder or the Tumaker 3D printers or Piocreat for direct extrusion. Tumaker 3D printers in the dual extrusion variant are especially suitable for printing with the PA11 pellets as a support material, even in combination with filament. It is also possible to manufacture filament from food-grade blue PA11 pellets with the help of the Felfil EVO extruder.
General information |
|
| Manufacturer | - |
| Material | PA |
| Format | 1 kg Kg |
| Density | 1.36 g/cm³ |
| Average granulation | 0.05-0.1 µm |
| Chemical resistance | ✓ |
Mechanical properties |
|
| Izod impact strength | - KJ/m² |
| Charpy impact strength | - KJ/m² |
| Elongation at break | 5 % |
| Tensile strength | 48 MPa |
| Tensile modulus | 3800 MPa |
| Flexural strength | 29 MPa |
| Flexural modulus | 3600 MPa |
| Surface hardness | Shore 76 D |
Thermal properties |
|
| Melting temperature | 180 ºC |
| Softening temperature | - ºC |
| Processing temperature | 260 ºC |
| Heat deflexion temperature | 163 ºC |
Other |
|
| HS Code | 3901.1 |
Featured properties
Alimentary use
✓
Related products
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
Food-grade blue PA11 in powder form pellets (very small particle size), for extrusion in pellet extruders.