Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

PA-6 R

Ref.: PA6-R-NANOVIA-175-500

44.00 €

Tax excl.

Diameter

Format

Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Out of Stock

Returns

Ask about this product

The PA-6 R filament is a nylon filament created from recycled fishing nets from the French coast, within the framework of the RECYPECH programme of the Coopération Maritime, which aims to recycle waste from the fishing industry.

This initiative was launched by the Guingamp-Paimpol Agglomération (Brittany, France) to establish a circular economy with waste from the port. The collected fishing nets are taken to ESATCO where they are transformed into plastic pellets by Fil & Fab in Brest and finally turned into filament for 3D printers by Nanovia.

Redes para reciclar

Image 1. Fishing nets for the creation of filament. Source: Nanovia

Polyamide 6 (PA6) is the most common extruded polyamide. It is known in industry for its good damping properties and impact resistance, as well as good toughness at low temperatures. It is ideal for bearings and gears, for example.

This filament is a polymer with a certain degree of flexibility (elongation at break) which makes it suitable for the creation of mechanical parts that need to absorb impacts. Nanovia PA-6 R has a very low mechanical degradation rate when heated, which allows it to be used up to about 100 °C, making it easy to create shock-resistant mechanical parts.

The advantages of the PA6 R filament include:

Heat resistant
Resistant to chemicals
Shock absorbing
Recycled

PA6 has a high sensitivity to moisture and must be kept in dry conditions at all times.

General information
Material	PA
Format	0.05 / 0.5 kg
Density	1.14 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	- mm
Filament length	-

Mechanical properties
Elongation at break	- %
Tensile strength	- MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	-

Printing properties
Printing temperature	260 -280 ºC
Print bed temperature	80 - 100 ºC
Chamber temperature	-
Cooling fan	-
Recommended printing speed	- mm/s

Thermal properties
Softening temperature	- ºC

Specific properties
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

It must be taken into account that PA6 is a material with a certain difficulty in printing, due to the warping effect it can generate.

PA6 is a very hygroscopic material, so it is advisable to store PA6 pellets in an airtight bag or use desiccant bags to prevent them from absorbing moisture. If the pellets have moisture in them, the filament that is manufactured may contain small imperfections that can negatively affect the final result.

To ensure good printing conditions, PA-6 filament should be dried at 60°C for 4 hours or more when the spools have been exposed to moisture for a prolonged period of time.