

Financing available through leasing or renting. More information
from 54.00 €/month
(tax not included)
The xTool P2S with 55W represents the pinnacle of innovation in the world of desktop laser cutting and engraving. Designed as the flagship solution of xTool, this machine incorporates high-performance CO2 laser technology, intended to meet the needs of both professional users and creative workshops looking for industrial-grade performance in a compact, versatile, and easy-to-operate device.
Unlike diode laser cutters, this CO2 technology allows working with a wide variety of materials, and most importantly: it allows cutting acrylic of any color, including transparent acrylic up to 20 mm thick in a single pass. Thanks to its real 55W output power, combined with an excellent absorption rate and millimeter precision, the xTool P2S guarantees professional results in clean cuts and detailed engravings, even on especially complex materials such as 18 mm black walnut wood, natural leather, anodized metals, textiles, rubber, paper, cardboard, ceramics, among over 100 other compatible materials.
The P2S offers a wide working area of 600 x 305 mm, has a maximum operating speed of 600 mm/s, an image resolution of 1000 DPI, and allows engraving pieces with heights between 64 mm (with tray), 71 mm (without tray), and 215 mm (with riser base).
The xTool P2S version is a significant improvement over its predecessor, the P2, with key optimizations in both performance and user experience. It is an evolution designed by the company based on direct feedback from thousands of users who use this tool in their creative businesses, personalization workshops, technical education, and small-scale production.
One of the most notable improvements is the high-performance air assist system, powered by a 14,000 RPM brushless motor. This system includes two suction and exhaust fans that allow doubling the efficiency of waste and particle evacuation, functioning as a powerful dust extraction system that keeps the work area clean, safe, and free of obstructions.
In addition, this CO2 laser cutter incorporates a dual-cylinder air pump, an industry first, which offers 200 KPa of constant pressure, 33% more than the previous model. This allows for a more stable airflow during cutting, preventing burns, soot accumulation, and uneven edges, achieving more defined cutting results, even in detailed work or with sensitive materials.
Maintenance is another of the most optimized points in the xTool P2S. With a completely redesigned system, the equipment facilitates daily cleaning in just a few minutes thanks to elements such as:
In addition, the optical alignment system is done in less than five minutes thanks to the new Alignment Indicator, allowing precise adjustment of the laser beam path even without prior experience. These features reduce downtime and allow the machine to be kept in optimal condition with minimal effort.
The P2S model also introduces substantial improvements in engraving speed, thanks to an enhanced acceleration system on the X-axis, which allows for an increase in speed of up to 40% according to internal tests carried out by xTool. This improvement is especially effective in elongated designs or in serial production, where efficiency is key.
In addition, it incorporates AutoPassthrough™ technology, which allows working with materials up to 2997 mm long automatically, ideal for large-format jobs or the production of long pieces without having to manually reposition the material.
The LiDAR autofocus system with 0.001-inch precision ensures consistent cuts and constant depths even on uneven surfaces, significantly increasing the reliability of the process. Thanks to its integrated artificial intelligence with dGPU, the equipment accurately recognizes the thickness and dimensions of the material in real-time.
The xTool P2S has been designed to break boundaries and expand creative possibilities. Thanks to the exclusive 3D Curve™ Engraving feature, the equipment generates automatic 3D models of the object to be engraved, allowing working on curved surfaces with millimeter precision. This feature is ideal for engravings on thermoses, bottles, tubes, or any cylindrical object, radically improving personalization on non-flat shapes.
On the other hand, the dual 16MP HD camera allows a panoramic view of the work area and a second detailed view that allows precise positioning of the design on small or irregularly shaped materials. This dual system ensures that each design is applied in the correct location, eliminating errors and waste.
The xTool P2S stands out as a laser cutting and engraving machine designed with a clear focus on safety. This equipment combines advanced technology and specific features to ensure reliable use in various environments, from professional workshops to shared spaces.
The precise sensors of the xTool P2S avoid false alarms by not confusing sunlight, flame-like shapes, or smoke, unlike other traditional systems. In addition, its closed design with a light-filtering lid prevents light or smoke leaks, while the automatic lid lock during operation reinforces protection.
Furthermore, the C02 laser cutter has an emergency stop button that allows for immediate shutdown in critical situations. The multiple alert system monitors aspects such as the temperature of the motherboard, the status of the cooling system, and water levels, ensuring safe and stable performance.
The smoke extraction system of the xTool P2S is one of its strengths. Equipped with a 145 CFM fan, this machine removes smoke quickly and effectively. Simply place the exhaust pipe next to a window to keep the environment free of odors and particles, ensuring a clean and healthy working experience.
The last outstanding feature of this CO2 laser cutter is its Fire Safety Set flame extinguishing module. This system is equipped with five flame detection sensors strategically located inside the machine. These sensors constantly monitor the work area to identify any signs of fire. When a flame is detected, the system activates a sound alarm to alert the user immediately. Seconds later, if the fire persists, an intelligent switch automatically turns off the machine to stop the cutting or engraving process that could be fueling the fire.
Next, the system releases non-toxic and odorless CO2 gas from bottles included in the set. This gas is pumped directly into the work area, extinguishing the fire by displacing oxygen, which is essential for combustion, without leaving residue or damaging the machine. The CO2 bottles are replaceable and easy to install after use, which ensures that the system can be operational again quickly.
The installation is simple and does not require additional tools, as the kit is designed to integrate practically with the P2S. In addition, its "plug-and-play" design facilitates its configuration, providing peace of mind to the user by minimizing risks during operations with flammable materials such as wood, acrylic, or leather.
xTool has designed different packs to adapt to various needs, from beginner creators to professionals looking to maximize their production. Each option, from the basic version to advanced combinations with equipment such as the F1 or the F1 Ultra, includes additional tools that enhance creativity and efficiency. All versions or packs of the P2S include the ‘Free Fire Safety Set’ flame detection and extinguishing system. Below is a detail of what each pack offers to facilitate the choice according to the objectives:
xTool P2S: power at its core
The basic pack stands out for its robustness and reliability. With a working area of 660 mm x 355 mm, improvements such as a more powerful extraction fan and a safe design, the xTool P2S is ideal for workshops or entrepreneurs who need equipment with the essentials to start working immediately.
xTool P2S Pack Versatile: expanded flexibility
This package expands the possibilities of the P2S with accessories that allow working with taller objects (Riser Base) and rotary items (RA2 Pro: 4 in 1 Rotary), it also includes an automatic feeder for working with larger pieces. It is an excellent option for engravings on curved surfaces or personalization of unique pieces, such as glasses or jewelry, always maintaining impeccable precision.
xTool P2S Pack All-in-One: the complete solution
Designed for those seeking the maximum, this pack offers the same as the Versatile pack and adds an air purifier that ensures a clean environment, transforming the P2S into an advanced production tool, ideal for optimizing creativity and productivity.
xTool P2S + F1 Pack Business Duo: power for expanding businesses
This duo combines the P2S with the xTool F1, an ultra-fast engraving machine with fiber and diode laser. While the P2S cuts and engraves thick materials such as wood and acrylic, the F1 excels in detailed customizations on metal and plastic, forming a perfect team for personalized services. In addition, it includes the RA2 Pro: 4 in 1 Rotary attachment, the automatic feeder, a Riser Base, a cutting panel, and the SafetyPro AP2 Air Purifier.
xTool P2S + F1 Pack Ultra Business Duo: professional excellence
Aimed at the most demanding, this pack unites the P2S with the F1 Ultra, an improved version with 20W of power in fiber and diode laser. With a speed of up to 10,000 mm/s and a precision of 0.00199 mm, it offers premium finishes on diverse materials, from metal jewelry to acrylic decorations. This pack includes also a cutting panel and the SafetyPro AP2 Air Purifier.
Available in two modern finishes —white and black—, the xTool P2S CO2 laser cutter combines an attractive design with a solid structure. Its compact size makes it the ideal tool for both creative studios and emerging companies looking for industrial solutions in a small space.
With a large working area, an intuitive interface, and compatibility with the main design software, this cutting and engraving machine offers an enormous range of possibilities by allowing working with more than 100 materials. The xTool P2S changes the rules of creation and encourages users to push the boundaries of creative and professional production.
General information |
|
Manufacturer | xTool |
Technology | Laser cutting |
Certificates | Class 4 |
Machine properties |
|
Ambient operating temperature | 10 - 30 ºC |
Accuracy | 0.3 mm |
Maximum part height | 64 mm / 71 mm / 215 mm |
Integrated webcam | ✓ |
Resolution | 1000 DPI |
Laser type | CO2 |
Dimensions of the workspace | 600 x 305 mm |
Laser properties |
|
Laser power | 55 W |
Software and connectivity |
|
Software | xTool Creative Space / Lightburn |
Supported files | SVG / DXF / JPG / JPEG / PNG / BMP, etc. |
Connectivity | WiFi / USB |
Cutting and engraving properties |
|
Maximum cutting speed | 600 mm/s |
Dimensions and weight |
|
Dimensions | 1000 × 639 × 268 mm |
Weight | 45 Kg |
Other |
|
HS Code | 8477.5900 |
Before starting to operate the P2S, it is recommended to read the documentation LSO Training for the xTool P2 series.
The xTool P2S is classified as a Class 4 Laser, according to international safety standards. It is recommended to review the technical documentation and safety guidelines available on the official xTool website to understand the risks and protection measures associated with this type of laser.
More information available in the Attachments tab.