Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Istroflex

Ref.: NANOVIA-ISTROFLEX-175-500

35.95 €

Tax excl.

Diameter

Format

Quantity

In stock 3 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 13 September

Available

Returns

Ask about this product

Nanovia is a renowned French manufacturer of filaments and products for 3D printing specialised in offering technical products.

Nanovia Istroflex is a flexible filament based on a biodegradable polymer with oyster powder. It is therefore considered a Biocomposite material. In addition, the Istroflex filament can be composted.

This innovative material is one of the first compostable flexible filaments on the market. Biocomposite filaments are presented as an alternative to others with a greater environmental impact. Sustainability is an increasingly important factor in various sectors, making this filament an option to consider.

Nanovia Istroflex has been developed together with the technical platform ComposiTIC and Usine de Kervellerin and was awarded the CCI Morbihan innovation prize.

Istroflex

Image 1: Piece 3D printed with Istroflex. Source: Nanovia.

The whitish colour of this filament is naturally given by its filling with particles derived from oysters. For this reason, the colour of the filament may vary slightly from one batch to another, without implying any manufacturing defect.

In terms of properties, the Istroflex filament has a Shore 93A hardness. This hardness makes the filament very easy to print compared to other flexible filaments, allowing it to be printed even with bowden type extruders. In addition, this material has excellent adhesion between layers.

In addition, Nanovia Istroflex filament is ROHS-certified as it is free of heavy metals. The material is also certified as endocrine disruption free, and is suitable for food contact. This last feature is very differentiating, as there are not many flexible filaments with this certification. For more information, it is recommended to consult the material safety data sheet.

Without a doubt, Istroflex is an innovative material in the flexible filament category, being one of the few compostable filaments on the market.

General information
Material	TPU/TPE
Format	50 g / 500 g
Density	(ISO 1183) 1.34 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	± 0.05 mm
Filament length	(Ø 1.75 mm - 0.5 Kg) ± 155 m / (Ø 2.85 mm - 0.5 Kg) ± 58 m

Printing properties
Printing temperature	250 - 280 ºC
Print bed temperature	40 - 70 ºC
Chamber temperature	-
Cooling fan	✓
Recommended printing speed	50 - 70 mm/s

Mechanical properties
Charpy impact strength	1.8 KJ/m²
Elongation at break	(ISO 527) 300 %
Tensile strength	11.5 MPa
Tensile modulus	(ISO 527) 60 MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	-

Thermal properties
Softening temperature	- ºC

Specific properties
Transparency	✗
Flammability classification	HB UL 94 @ 1.6mm

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	52 mm
Spool width	55 mm

It is not absolutely essential to use a heated bed when 3D printing Istroflex. However, if available, it is recommended to use a temperature between 40 and 60°C to improve adhesion to the base. It is also possible to use adhesives such as Magigoo for optimal adhesion and to avoid warping.

The recommended printing temperature is between 250 and 280°C, which is slightly higher than for other flexible filaments. It is possible that not all 3D printers can reach this temperature range, so it is recommended to check this.

Istroflex is a hygroscopic material. It is therefore recommended to store the spool in a dry place, preferably with desiccant bags. If moisture is absorbed, we recommend using a device such as Print Dry Pro to dry the filament.