Treed PC-ABS V0
search
  • Treed PC-ABS V0
Compare
You must be logged in to manage your wishlist.

Treed PC-ABS V0

TREED-PC-ABS-V0-175-1000
40.00 € 40.00 €
Tax excl.
Diameter
Format
Colour
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Out of Stock

Treed Filaments, an Italian 3D printing materials manufacturer that stands out for its wide catalogue of filaments developed for various applications and sectors, such as the medical sector, the architecture and art sector or high-performance technical filaments for industry. Among these materials is the PC-ABS V0 filament.

PC-ABS V0 is a polymer alloy, consisting of PC and ABS, and combines the outstanding properties of both polymers.

Part printed with Treed's PC ABS V0 filament

Image 1: Part printed with Treed's PC ABS V0 filament. Source: Treed Filaments.

It is an easy-to-print filament as long as printing is carried out with the correct print settings, and it has a high mechanical strength and hardness which makes it a highly recommended material for use in automotive and railway applications.

PC-ABS V0 has been previously tested in order to successfully obtain the certification that makes it suitable for railway applications. It is certified V0 according to UL94, a test that measures the burning time of a vertically fixed polymer sample after it has come into contact with flame. In this case, its classification is V0 because the end result is that the fire is extinguished within 10 seconds without the appearance of dripping.

Hangers 3D printed with Treed's PC ABS V0

Image 2: Hangers 3D printed with Treed's PC ABS V0. Source: Treed Filaments.

Thanks to PC-ABS V0 filament, many trains in Europe are getting back on the tracks as this special technopolymer material enables the replacement of worn electrical components in trains, optimising costs without loss of quality.

PC-ABS is prone to moisture absorption, so it is recommended to store the filament in an airtight container with a desiccant sachet or use a PrintDry vacuum-sealed container. If the filament has been exposed to humid conditions, it is recommended to use a filament dryer such as PrintDry to dry the filament. Using wet filament can cause degradation of the polymer, increase the brittleness of the material or affect the adhesion of layers when 3D printing a part.

PC-ABS V0 is a very printable material, which makes it an excellent solution for automotive electrical components as well as for the railway industry.

General information
Material PC-ABS
Format 1 kg
Density 1.18 g/cm³
Filament diameter 1.75 mm
Filament tolerance - mm
Filament length 352.3 m

Printing properties
Printing temperature 260 - 280 ºC
Print bed temperature 90 - 110 ºC
Chamber temperature ✓
Cooling fan 0 - 20 mm/s
Recommended printing speed 25 - 35 mm/s

Mechanical properties
Charpy impact strength (ISO 179) (@ 23 ºC) 46 / (@ -30 ºC) 13 KJ/m²
Elongation at break (ISO 527) 120 %
Tensile strength (ISO 527) 54 MPa
Tensile modulus (ISO 527) 2700 MPa
Flexural strength - MPa
Flexural modulus (ISO 178) 2750 MPa

Thermal properties
Softening temperature (ISO 306) 104 ºC

Other
HS Code 3916.9
Spool diameter (outer) - mm
Spool diameter (inner hole) - mm
Spool width - mm

To use Treed PC-ABS filament, it is recommended to use a printing temperature between 260 and 280 ºC, and a bed temperature between 90 and 110 ºC. It is recommended to use a printer with a heated chamber.

In addition to this, it is recommended to use a specific adhesive such as Magigoo PC, or use 3D Lac to improve adhesion to the base, especially when printing large parts, avoiding the warping effect to a large extent. It is also very useful to activate a 5 - 10 mm brim around the part to be printed.

In terms of printing speed, it is recommended to print at a speed between 25 and 35 mm/s.

PC-ABS is sensitive to moisture absorption, so it is recommended to store the filament in an airtight container with a desiccant sachet or use a PrintDry vacuum-sealed container. If the filament has been exposed to humid conditions, it is recommended to use a filament dryer such as PrintDry II to dry the filament. Using wet filament may cause degradation of the polymer, increase the brittleness of the material or affect the adhesion of layers when 3D printing a part.

Featured properties

Printing temperature
260 - 280 ºC
Filament diameter
1.75 mm
Density
1,18 g/cm³

Related products