Lay-Brick (Ceramic)

New product

24 Items

22,90 €
22,90 €

Ask for information

Filament made of sandstone that recreates a surface finish similar to stone or ceramic.

Lay-Brick is a filament made for 3D printing with sandstone and binding polymer that creates a surface finish similar to a stone or ceramic object.

Besides varying the extrusion temperature the surfaces are more or less rough. Lay-Brick is like the Laywoo-D3 indicated for 3D printing of decorative pieces. The combination of the new geometries that are possible to manufacture thanks to 3D printing and the various possibilities of surface finish featuring Lay-Brick allow you to create innovative decorative pieces.

Once the Lay-Brick used in your 3D printer filament it is highly recommended you remove the remaining filament, filament upload to extrude PLA for one minute at high temperature (230 ºC). This will eliminate shape inside the printhead any remaining Lay-Brick filament which could cause jamming of the nozzle. In the tab usage tips you will find more information about how to use this strand in your 3D printer and you get the best printing results you risk to spoil or damage some of the components.

The nozzle temperature may range from 165 and 210ºC. Less rough surfaces are obtained at low temperatures. As temperature increases, more rough and harsh surfaces are produced. When printing is finished, it is recommendable inserting PLA filament and charging it for 30 seconds in order to remove the remains of LayBrick inside the extruder. This avoids the extruded to be blocked when printing again.


  • Material Type: Sandstone binding polymer

  • Color: White

  • Transparency: opaque

  • Diameter: 1.75mm or 3mm

  • Nozzle temperature: 165-210ºC

  • Printing base temperature: Ambient temperature

  • Net Weight: 250g Roll

  • Roll diameter: 200mm

  • Roll width: 30 mm

  • Inside hole diameter: 125mm

  • Shipping Weight: 0.35kg

  • Shipping Dimensions: 220x220x40mm

  • HS Code: 3916.9

6 other products in the same category: