Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesPLA ESD filament is one of the materials offered by 3DXtech, a renowned American manufacturer specialising in technical filaments for professional applications.
PLA ESD filament is a filament specifically developed for applications requiring electrostatic discharge protection. It is manufactured from Natureworks PLA and CNT for exceptional repeatability and reliability and its surface resistance ranges from 10^7 to 10^9 Ohm.
Thanks to its high PLA content, this material retains many of the properties of PLA:
In addition, PLA ESD has other very interesting properties that make it stand out from other ESD materials:
PLA ESD filament is ideal for the manufacture of hard disk drive components, enclosures or connectors. It is also very useful in industrial applications such as device manufacturing, transportation, measurement, end-of-arm tooling and sensing applications.
In order to achieve the highest possible electrostatic conductivity, it is recommended to use the highest possible extrusion temperature recommended by the manufacturer (220 ºC).
Elongation at break (%) | 10 |
Tensile strength (MPa) | 55 |
Tensile modulus (MPa) | 2560 |
Flexural strength (MPa) | 95 |
Flexural modulus (MPa) | 2980 |
PLA ESD filament is as easy to print as PLA. The recommended printing temperature is between 210 and 220 ºC. PLA ESD is a filled product and has a higher melt viscosity compared to unfilled PLA. Therefore, it is sometimes necessary to print at higher temperatures than a standard PLA to allow the material to flow properly.
As with a standard PLA, this material does not require the use of a heated bed, although if it is available, the recommended temperature is 23-60 ºC. The recommended print speed is 60 mm/s or higher, and the use of the coating fan is recommended for optimal finishing.
Although it is not prone to warping, Magigoo or Dimafix can be used to improve adhesion to the base.
With PLA ESD it is not necessary to use reinforced nozzles as this filament has low abrasion, but nozzles with output diameters of 0.5 mm or more are recommended to avoid clogging.
If you have an FDM 3D printer with a double extruder and you need to 3D print complex parts, it is possible to use this material in combination with X1 support, a hot water soluble material.
General information | |
---|---|
Manufacturer | 3DXTech |
Material | 3DXSTAT ESD PLA |
Format | Spool of 1 Kg Pack of 50 g |
Density | 1.26 g/cm3 |
Filament diameter | 1.75 or 2.85 mm |
Diameter tolerance | ±0,05 mm |
Filament length | ±330 m (Ø 1.75mm - 1 Kg) ±124 m (Ø 2.85mm - 1 Kg) |
Colour | Black |
RAL/Pantone | - |
Printing properties | |
Printing temperature | 210 - 220 ºC |
Base/bed temperature | Not required |
Chamber temperature | Not required |
Layer fan | Recommended |
Print speed | <60 mm/s |
Minimum nozzle diameter | 0.5 mm or higher |
Layer height | - |
Retraction | - |
Mechanical properties | |
Izod impact resistance | - |
Charpy impact resistance | - |
Elongation at break (DIN 53504-S2) | 10 % |
Tensile strength (DIN 53504-S2) | 55 MPa |
Tensile modulus | 2560 MPa |
Bending strength | 95 MPa |
Bending modulus | 2980 MPa |
Surface hardness | - |
Abrasion resistance | - |
Thermal properties | |
Softening temperature (ASTM E2092) | 60 ºC |
Melting temperature | - |
Specific properties | |
Resistant to disolvents | - |
Additional information | |
HS Code | 3916.9 |
Spool diameter (outside) | 200 mm |
Spool diameter (inner bore) | 53 mm |
Width of spool | 50 mm |
* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.
24,95 €
14,01 €
24,79 €
18,40 €
34,90 €
16,45 €
32,90 €
28,92 €
33,05 €
41,28 €
37,15 €
35,50 €
33,02 €
28,92 €
28,92 €
28,92 €
46,75 €
40,65 €
40,65 €
40,65 €
34,95 €
34,95 €
34,95 €
34,95 €
34,95 €
44,00 €
24,75 €
32,97 €
39,90 €
33,50 €