No products

To be determined Shipping

0,00 € Tax

0,00 € Total

Check out

Product successfully added to your cart

0 products in the cart 1 product in the cart

Quantity:

Checkout

Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

More information Gestionar cookies

I accept

View larger

9.3" 4K Monochrome LCD for XiP Nexa 3D

Reference: NEXA-XIP-LCD

Brand: Nexa 3D

This product could be delivered in a longer time than the standard.

Condition: New product

Quantity

455,00 €

Ask for information

Official replacement for the XiP 3D printer LCD screen.

Add to wishlist

More info
Usage tips
Specifications

The LCD screen is an indispensable consumable in any LCD resin printer. An image of each printed layer is generated on the LCD while an array of LED chips project light through the LCD. The modular 9.3" 4K monochrome LCD for the XiP printer by Nexa 3D is an original hiqh quality replacement part.

The XiP LCS screen

Image 1: The XiP LCD screen. Source: Nexa 3D.

It features a 52 micron pixel pitch and plugs directly into the XiP printer without the need to manually attach bus wires or seat the screen. Each XiP LCD screen serves for over 3000 hours of printing and requires 1-2 replacements per year based on printer usage. The LCD screen is protected from damage by a glass cover which should be replaced if it is cracked or scratched (risk of damagind the Everlast 2 Membrane).

A detailed guide on how to replace the XiP LCD screen can be found in the Usage Tips section.

The XiP LCD screen is a consumable that should be replaced after around 3000 hours of printing (once or twice per year, depending on printer usage). Changing the LCD screen in the XiP printer only takes 4 steps and requires a 3 mm hex key provided with the printer:

How to replace the XiP LCD screen

Image 1: How to replace the XiP LCD screen. Source: Nexa 3D.

Before the LCD screen is removed, the printer should be turned off and unplugged. Then the printer door should be opened and the build plate lifted completely on the Z-axis. Next, the resin cartridge, build plate and resin vat should be removed. Now the process of changing the LCD screen can begin:

The four screws that attach the LCD screen to the printer should be removed with the help of the 3 mm hex key.
The screen should be lifted straight up and removed.
The new LCD screen (oriented with the PCB connector at the front) should be placed on the printer,
Lastly, the four screws should be screwed back into place until hand tight.

The entire LCD screen replacement process is also demonstrated by the manufacturer in a YouTube video:

Video 1: Replacing the XiP LCD screen. Source: Nexa 3D.

Once the LCD screen has been replaced, the user should make sure to run the build plate leveling procedure by going to the settings option on the XiP touchscreen and selecting maintenance: build plate leveling. This step is essential and skipping it will result in damage to the new LCD screen.