Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesWarning: Last items in stock!
Availability date:
The company Polymaker, leading in the manufacture of filaments for 3D printing, has created the Polysher, a machine that combined with the PolySmooth gets the desired finish by all users of a 3D printer and effortlessly.
This machine achieves a smooth and glossy finish of any piece made with the PolySmooth filament in a short time interval (10-30 minutes) in a very simple way. First press the button that goes up the platform, you insert the piece in the Polysher, again press the button of the platform and you turn the wheel to select the time required.
Then a cloud of isopropyl alcohol surrounds the piece and softens the exterior lines of the layers to a uniform and shiny surface finish. The key part in ensuring that all treatment is performed accurately and efficiently is the neutralizer, a piece consisting of a microperforated membrane with holes smaller than 10 microns, which is attached to a microelectric actuator which drives the isopropyl alcohol with a maximum size of 5 to 10 microns, which generates a continuous and dense cloud.
After the necessary time, the machine climbs its platform to be able to remove the piece with ease. For older, the Polysher has internal light with a wide range of colors to increase its decorative appeal.
Thanks to this machine the laborious and dangerous surface finishing processes with acetone vapor, typical treatment for the ABS, nothing recommended if carried out of homemade form, since it is a product highly flammable at room temperature even when diluted in water . Polysher has elevated the possibilities for many designers and creators who are already familiar with 3D printing, such as sculptors and toy designers, to be able to realize their ideas in a self-taught way from start to finish and with the spectacular finish, even comparable to manufactured parts by injection of plastic.
Before mounting and using the PolySher it is recommended to read the operating manual found in the download section of this product and see the following official Polymaker videos of the assembly and operation.
Manufacturer | Polymaker |
---|---|
Compatible Material | PolySmooth |
Polishing Liquid | Isopropanol or ethanol >70% (>90% recommended) |
Operation Temperature | 15-32ºC |
Power Requirements | 100-240v, 2A max. 50/60Hz |
Máximum Polishable Size | 150 mm (diameter) x 180 mm (height) |
Product Dimensions | 230 x 270 x 370 mm |
HS Code | 8477.5 |
29,95 €
20,95 €
10,95 €
49,55 €
34,70 €
24,71 €
22,90 €
8,25 €
26,95 €
33,00 €
19,99 €
35,00 €
29,75 €
98,50 €
34,90 €
450,00 €
49,55 €
29,00 €
5 299,00 €
230,58 €
99,00 €
299,00 €
151,84 €
36,30 €
118,08 €
1 708,52 €
1 708,52 €
14,95 €
35,00 €
35,00 €