You must be logged in to manage your wishlist.
Insublend pellets
NANOVIA-PELLETS-INSUBLEND-500
36.50 €
Tax excl.
Approximate delivery date: Friday 6 June - Friday 13 June
Insublend is a material manufactured by Nanovia, a French manufacturer of filaments and 3D printing products specialised in offering technical products. Insublend pellets enable the creation of insulating and weather-resistant parts.
- Pellets can be used in the manufacture of filament for FDM 3D printers using Filastruder or any other filament extruder.
- It is possible to use a pellet extruder for 3D printing directly.
With the combination of Insublend Pellets and a good filament extruder such as Filastruder, it is possible to obtain 3D printing filament with qualities similar to those of commercial filament.
When using Insublend Pellets to make filament with a filament extruder such as Filastruder or using a pellet extruder for direct 3D printing, it should be noted that the extrusion temperature must be regulated in relation to the extrusion speed used.
Its resistance to alkalis, acids, bases, ionic solutions and alcohol make it an ideal material for batteries, electronic equipment, prototypes and industrial use.
Among the advantages of this material are its resistance to UV rays and oxidation, it is certified as non-flammable V-0 UL94 and is electrically insulating.
General information |
|
| Manufacturer | Nanovia |
| Material | HiPS |
| Format | 0.5 / 5 kg |
| Density | 1.08 g/cm³ |
Mechanical properties |
|
| Elongation at break | (ISO 178) 20 % |
| Tensile strength | - MPa |
| Tensile modulus | (ISO 527) 67 MPa |
| Flexural strength | - MPa |
| Flexural modulus | (ISO 527) 2430 MPa |
| Surface hardness | - |
Electrical properties |
|
| Volumetric resistivity | (IEC60093) 10.10¹⁵ Ohm |
| Surface electrical resistivity | (IEC60093) 10.10¹⁵ Ohm |
Thermal properties |
|
| Melting temperature | - ºC |
| Softening temperature | - ºC |
| Processing temperature | 260 - 280 ºC |
| MFR Ratio | - |
| Glass transition temperature | - ºC |
| Heat deflexion temperature | - ºC |
Specific properties |
|
| Flammability classification | UL 94 V0 @ 1.6 mm / UL 94 5 VA @ 2.5 mm |
| Chemical resistance | ✓ |
Other |
|
| HS Code | 3901.1 |
The safety data sheet and technical data sheet can be found in the "Downloads" section.
Related products
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
Insublend pellets with insulating properties.