Insublend
search
  • Insublend
  • Insublend
Compare
You must be logged in to manage your wishlist.

Insublend pellets

NANOVIA-PELLETS-INSUBLEND-500
36.50 € 36.50 €
Tax excl.
Format
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 11 - 16 days Available for shipment within 11 - 16 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Tuesday 1 October - Tuesday 8 October
Available

Insublend is a material manufactured by Nanovia, a French manufacturer of filaments and 3D printing products specialised in offering technical products. Insublend pellets enable the creation of insulating and weather-resistant parts.

  • Pellets can be used in the manufacture of filament for FDM 3D printers using Filastruder or any other filament extruder.
  • It is possible to use a pellet extruder for 3D printing directly.

With the combination of Insublend Pellets and a good filament extruder such as Filastruder, it is possible to obtain 3D printing filament with qualities similar to those of commercial filament.

When using Insublend Pellets to make filament with a filament extruder such as Filastruder or using a pellet extruder for direct 3D printing, it should be noted that the extrusion temperature must be regulated in relation to the extrusion speed used.

Its resistance to alkalis, acids, bases, ionic solutions and alcohol make it an ideal material for batteries, electronic equipment, prototypes and industrial use.

Among the advantages of this material are its resistance to UV rays and oxidation, it is certified as non-flammable V-0 UL94 and is electrically insulating.

General information
Manufacturer Nanovia
Material HiPS
Format 0.5 / 5 kg
Density 1.08 g/cm³

Electrical properties
Volumetric resistivity (IEC60093) 10.10¹⁵ Ohm
Surface electrical resistivity (IEC60093) 10.10¹⁵ Ohm

Mechanical properties
Elongation at break (ISO 178) 20 %
Tensile strength - MPa
Tensile modulus (ISO 527) 67 MPa
Flexural strength - MPa
Flexural modulus (ISO 527) 2430 MPa
Surface hardness -

Thermal properties
Melting temperature - ºC
Softening temperature - ºC
Processing temperature 260 - 280 ºC
MFR Ratio -
Glass transition temperature - ºC
Heat deflexion temperature - ºC

Specific properties
Flammability classification UL 94 V0 @ 1.6 mm / UL 94 5 VA @ 2.5 mm
Chemical resistance ✓

Other
HS Code 3901.1

The safety data sheet and technical data sheet can be found in the "Downloads" section.

Related products