Nozzle Revo 0.40 mm
search
  • Nozzle Revo 0.25 mm
  • Nozzle Revo 0.40 mm
  • Nozzle Revo 0.60 mm
  • Nozzle Revo 0.80 mm
Compare
You must be logged in to manage your wishlist.

Nozzle Revo E3D

E3D-RC-NOZZLE-AS-0400
29.95 € 29.95 €
Tax excl.
Diameter Nozzle
Quantity

In stock 3 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 26 December
Available

E3D, renowned for its high quality components for FDM 3D printers, has revolutionised the market with its new Revo line, comprising a complete ecosystem of Rapid Change hotends that allow users to change nozzles quickly and easily at room temperature, without the need for additional tools.

Innovative system

The Revo ecosystem is a revolutionary system. Thanks to its innovative design, the Revo system allows the user to change the nozzle with their own hands, without having to worry about being damaged by high temperatures and without using specific tools.

Revo System.

Image 1: Revo system. Source: E3D.

The nozzles in the Revo range include what in other systems would be the heat break and the nozzle together in one piece. In addition, the nozzle area has a silicone protection that helps the user to tighten and loosen the part without slipping.

Ease of use

Unlike other systems, where over-tightening can affect or even damage the hotend, Revo nozzles are safe to use and there is no possibility of incorrect installation.

Revo nozzles are available in the following outlet diameters: 0.25 mm, 0.40 mm, 0.60 mm and 0.80 mm.

Revo nozzle range.

Image 2: Revo nozzle range. Source: E3D.

In addition, thanks to the colour coding of the silicone protection, the user can identify the different outlet diameters at a glance. In addition, each Revo nozzle has its size engraved with numbers, avoiding confusing identification marks.

Compatibility

Revo nozzles are only compatible with hotends from the Revo ecosystem, such as the Revo Micro Hotend, Revo Six or Revo Hemera.

Video 1: Revo Ecosystem. Source: E3D.

Thanks to the Revo system, it is possible to save time on nozzle changes, streamlining the workflow.

General information
Manufacturer E3D
Filament diameter 1.75 mm
Nozzle diameter 0.25 mm, 0.40 mm, 0.60 mm, 0.80 mm
Nozzle material Brass
Compatibility Hotend Revo Six / Hotend Revo Micro / Hotend Revo Hemera

Other
HS Code 8477.9

To change the Revo nozzles, the following steps must be followed::

  1. Wait until the hotend is at room temperature. Wait until the hotend has cooled down to 50 °C or less before changing Revo nozzles.
  2. Unscrew the Revo nozzle according to the picture. This step can be done with your own hands, without using additional tools.
  3. Screw on the new Revo nozzle according to the picture, also with your own hands.

Instrucciones para cambiar nozzles Revo.

Image 1: Instructions for changing Revo nozzles. Source: E3D.

Please note that Revo nozzles are only compatible with original E3D hotends with Revo system, such as the Revo Six, Revo Micro or Revo Hemera hotend.