Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookies316L Stainless Steel is a chromium nickel molybdenum, austenitic stainless steel with low carbon content. It is antimagnetic in its annealed state and cannot be hardened by heat treatment, but nevertheless has good forming properties, gaining strength by deformation. This has the disadvantage of requiring higher stresses to deform it. Its good ductility, tensile strength, heat resistance and corrosion resistance even at high temperatures, make 316L stainless steel used in many industrial applications: aeronautical industry as standard material, sectors that need metals resistant to the effects of salts and acids (paper, textile or chemical) or pharmaceutical industry to avoid metal contamination.
The Mt 316L filament allows dense stainless steel parts to be printed with a standard 3D printer which can then be sintered without the need for chemical debinding. After sintering, the result is a 100% stainless steel part.
Among the advantages of Mt 316L filament we can highlight:
To learn more about the sintering process, please refer to the "Tips for use" section or visit the manufacturer's website.
Sintering
Sintering of the Nanovia Mt Inox 316L filament takes place in two steps:
Temperature (°C) |
0 – 425 |
425 |
425 – 1050 |
1050 – 1150 |
1150 – 1180 |
1180 |
||||
Time (min) |
213 |
240 |
313 |
200 |
300 |
1800 |
General information | |
---|---|
Manufacturer | Nanovia |
Material | Mt 316L |
Format | Spool of 500 g 50 g pack |
Density | 7.19 g/cm3 |
Diameter of filament | 1.75 o 2.85 mm |
Diameter tolerance | - |
Filament length | - |
Color | Dark grey |
RAL/Pantone | - |
Print settings | |
Printing temperature | 170 – 190 °C |
Print bed temperature | 40 – 60 °C |
Nozzle diameter | >0.6 mm |
Printing speed | 20 – 40 mm/s |
Mechanical properties | |
Izod impact strength | - |
Charpy impact strength | - |
Elongation at break (ISO 178) | - |
Tensile strength | - |
Tensile Modulus (ISO 527) | - |
Flexural strength (ISO 527) | - |
Flexural modulus | - |
Surface hardness | - |
Thermal properties | |
Softening temperature - | - |
Melting temperature | - |
Specific properties | |
Transparency | - |
Additional Information | |
HS Code | 3916.9 |
Diameter coil (outer) | - |
Diameter coil (inner hole) | - |
Coil Width | - |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
209,90 €
159,90 €
387,00 €
129,90 €
117,95 €
319,90 €
299,00 €
299,00 €
349,00 €
138,90 €
124,50 €
249,00 €
164,90 €
1 145,00 €
455,00 €
179,90 €
249,00 €
124,50 €
315,00 €
1 199,95 €
108,95 €
349,00 €
149,90 €
230,31 €
100,00 €
160,00 €