Sharebot XXL Plus - FDM 3D printer



New product

Ask for information


Sharebot XXL Plus is a 3D printer suitable for professional users who want to combine the quality, precision and high volume of print available (680x250x200mm)*. The horizontal development of the printing base allows large prototypes to be made in a single piece.

Sharebot XXL Plus 3D printer has dimensions of 950x450x410 mm and a weight of 40Kg. It is made of a stainless steel body, which gives it a great strength and consistency. Regarding the technical data, the Sharebot XXL Plus 3D printer has a print volume of 720x250x200mm* with a single extruder that can reach 250ºC and a printing base that can reach up to 90ºC.

Prints with 1.75mm filament and the minimum layer height is 0.1mm. In addition the Sharebot XXL Plus incorporates an LCD screen that allows to modify the printing speed, the temperature of the extruder and the base, the speed of the fan, etc. It also offers the possibility to print directly through an SD Card.

On the other hand, Sharebot XXL Plus has a filament sensor that paralyzes printing if the filament of the coil is exhausted or if the 3D printer suffers some type of problem.

Sharebot XXL Plus is a 3D printer with open software that must be downloaded from the website of Sharebot to always have the latest version. It is also compatible with free software such as slic3r.

Sharebot XXL Plus is shipped fully assembled, it is only necessary to remove the protective elements, place the printing base, load the filament and start printing in 3D. The delivery time from the confirmation of the can vary between 2 and 5 weeks.

It is advisable to wash the base glass between prints and apply lacquer before each print always out of the 3D printer. In case of applying the lacquer inside the 3D printer will lose the warranty.

ModelSharebot XXL Plus
Manufacturer Sharebot (Italy)
Technology FDM/FFF
Certificates -
Printer properties
Print volume 720 x 250 x 200 mm
Extruders  1
Filament diameter 1.75 mm
Nozzle diameter available 0.4 mm
Screen LCD
Electronics -
Firmware -
Filament sensor Yes
Nozzle clog sensor -
Autolevel -
Webcam -
Print properties
Positioning resolution (XY) 60 µm
Positioning resolution (Z) 2.5 µm
Layer height -
Max print speed 150 cm3/h
Max extruder temperature 230-250ºC
Max base temperature 70-90 ºC
Max camera temperature -
Working environment temperature 15ºC - 35ºC
Software and conectivity
Software slic3r
Compatible files stl, gcode
Conectivity USB, SD Card
Electrical properties
Input -
Output -
Consumption 500 W
Dimesions and weight
Printer dimensions 955 x 470 x 445 mm
Printer weight 38 kg
HS Code 8477.5900


30 other products in the same category: