Liqcreate Composite-X resin


This product could be delivered in a period exceeding the standard.

New product

58,95 €
58,95 €

Ask for information

Extremely rigid and chemically resistant 3D printing resin for experienced users.

The Composite-X resin from the catalog of engineering resins by Liqcreate is an extremely rigid and high performance nano-micro composite reinforced resin for SLA, DLP and LCD/MSLA 3D printing. With a flexural modulus of around 9000 MPa and a flexural strength of up to 170 MPa (with thermal post-curing), the Composite-X resin is superior to almost all photopolymer resins currently available on the market.

Video 1: Presenting the Composite-X resin. Source: Liqcreate.

Apart from the high rigidity, the Composite-X resin is characterized by high strength and great chemical resistance, as well as extremely low shrinkage and odor during printing. All these properties make the Composite-X resin the perfect material not only for rapid tooling but also for heavy duty industrial or automotive applications, wind tunnel testing, fluid flow components, etc.

A swingarm 3D printed with the Composite-X resin

Image 1: A swingarm 3D printed with the Composite-X resin. Source: Liqcreate.

The Composite-X is easy to use on all open SLA, DLP and compatible LCD/MSLA 3D-printers in the range of 385-420 nm by brands such as Anycubic, Phrozen or Creality. A full list of compatible printers can be consulted on the manufacturer's website.

A gear 3D printed with the Composite-X resin

Image 2: A gear 3D printed with the Composite-X resin. Source: Liqcreate.

It should be kept in mind that the Composite-X resin is intended for advanced users. Furthermore, the Composite-X resin can have an abrasive effect on aluminum parts due to the ceramic particles it contains. This is why it is highly recommended to use anodized aluminum or coated aluminum resin tanks when working with the Composite-X resin. More advice on printing with the Composite-X resin can be found in this article on the manufacturer's website.

Elongation at break (%) 1
Tensile strength (MPa) 75
Tensile modulus (MPa) 8500
Flexural strength (MPa) 150
Flexural modulus (MPa) 8500
Surface hardness 10
Chemical resistance Chemical resistance

In order to ensure resin longevity and successful 3D prints, it is advised to store the Composite-X resin in a clean and dry environment, out of direct sunlight and in a temperature of 5-30 ºC. Before use, the resin bottle should be shaken energetically for at least 1 minute (at least 3 minutes in the case of filled resins) and then left to rest for around 10 minutes to let the air bubble escape. Leftover resin can be poured back into the bottle but it should be first filtered to ensure there is no polymer residue present. Safety equipment such as protective garments, gloves and face protection is highly recommended for the handling of resin.

As far as the post-processing of the Composite-X resin, a few simple steps must be followed. First, the 3D printed part has to be cleaned for a maximum of 6 minutes in Liqcreate Resin Cleaner, IPA alcohol or bioethanol, preferably ultrasonic or under agitation. Then the completely dried part has to be cured in a high-power UV curing chamber. The curing workflow is explained in detail by the manufacturer here. It absolutely crucial that the parts are dry before they are cured. The curing of wet or sticky parts will lead to mechanical and surface defects. The drying can be done by simply leaving the cleaned part in a well ventilated area for at least 30 minutes or with the help of pressurized air (2 minutes) for parts cleaned in IPA alcohol or ethanol.

General information
Manufacturer Liqcreate
Technology  DLP/LCD/MSLA/SLA
Material Photopolymer
Wavelength UV 385-405 nm
Format 0.375 kg
1.5 kg
Color Opaque white
Compatible 3D printers List of compatible resin 3D printers
Printing properties
Layer height 50-100 µm
Layer exposure time -
Layer cooling time-
Lifting height-
Exposure of bottom layers-
Number of bottom layers-
Curing and washing properties
Washing time 4-5 min (IPA, Liqcreate Resin Cleaner, bioethanol or ultrasonic bath)
Curing time Curing settings
Curing temperature -
Mechanical properties
Izod impact resistance (ASTM D256A) 19 J/m
Charpy impact resistance -
Elongation at break (ASTM D638M) 1 %
Tensile strength (ASTM D638M) 50-75 MPa
Tensile modulus (ASTM D638M) 7500-8500 MPa
Flexural strength (ASTM D790) 140-150 MPa
Flexural modulus (ASTM D790) 7500-8500 MPa
Surface hardness (ASTM D2240) Shore 93D
Thermal properties
Softening temperature -
Brightness value -
Additional information
Service life -
HS Code 2916.1

* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.


30 other products in the same category: