Liqcreate Bio-Med Clear resin


New product

14 Items

90,90 €
90,90 €

Ask for information

Rigid clear resin for highly accurate sterilizable biocompatible parts.

The Bio-Med Clear resin from the Liqcreate catalog of biocompatible 3D printing resins is a rigid translucid low odor resin compatible with many resin 3D printers within the 385-420 nm range, including brands such as Anycubic, Phrozen and Creality. The full list of compatible equipment can be consulted here.

Video 1: The Liqcreate Bio-Med Clear resin. Source: Liqcreate.

Parts 3D printed with this material (if post-processed according to the manufacturer's guidelines) pass biocompatiblity tests for cytotoxicity (ISO 10993-5:2009), sensitization (ISO 10993-10:2021) and irritation (ISO 10993-23:2021). What's more, parts 3D printed with the Bio-Med Clear resin can be disinfected with commonly used disinfectants and subjected to steam sterilization in autoclave at 121 ºC / 134 ºC.

The properties of parts 3D printed with the Bio-Med Clear before and after sterilization

Image 1: The properties of parts 3D printed with the Bio-Med Clear before and after sterilization. Source: Liqcreate.

The Bio-Med Clear resin is not only biocompatible and sterilizable, but it also prints parts with high accuracy, low shrinkage and excellent dimensional stability. The combination of all those features makes this material ideal for the 3D printing of safe and precise custom medical devices and aids, as well as custom parts that can be used safely in contact with patients' skin.

Part 3D printed with the Bio-Med Clear resin

Image 2: Part 3D printed with the Bio-Med Clear resin. Source: Liqcreate.

It must be remembered that the biocompatibility of the used material, in this case the Liqcreate Bio-Med Clear resin, is not equivalent to the biocompatiblity of the 3D printed part. It should always be made sure that the storage, 3D printing and post-processing guidelines are followed in order to maintain the biocompatibility of the material.

Impact strength (KJ/m2) 3
Elongation at break (%) 10
Tensile strength (MPa) 55
Tensile modulus (MPa) 2000
Flexural strength (MPa) 89
Flexural modulus (MPa) 2200
Surface hardness 9
Chemical resistance Chemical resistance
Medical use Medical use

General printing, washing and curing tips can be found on the official Liqcreate support webpage. Since the Bio-Med Clear resin is a biocompatible material, special care must be taken at the time of post-processing in order for the parts to maintain biocompatibility. Full instructions on storage, printing and post-processing of the Bio-Med Clear resin can be found in this article.

General information
Manufacturer Liqcreate
Technology  DLP/LCD/SLA
Material Photopolymer
Wavelength UV 385-420 nm
Format 0.25 kg
1 kg
Color Colorless clear
Compatible 3D printers List of compatible resin 3D printers
Printing properties
Layer height 25-100 µm
Layer exposure time -
Layer cooling time-
Lifting height-
Exposure of bottom layers-
Number of bottom layers-
Curing and washing properties
Washing time 4-5 min (IPA, Liqcreate Resin Cleaner, bioethanol or ultrasonic bath)
Curing time Curing settings
Curing temperature -
Mechanical properties
Izod impact resistance (ISO 180) 3.04 kJ/m2 (notched)
Charpy impact resistance -
Elongation at break (ASTM D638M) 5-10 %
Tensile strength (ASTM D638M) 55 MPa
Tensile modulus (ASTM D638M) 2000 MPa
Flexural strength (ASTM D790) 89 MPa
Flexural modulus (ASTM D790) 2200 MPa
Surface hardness (ASTM D2240) Shore 85D
Thermal properties
Softening temperature -
Brightness value -
Additional information
Service life -
HS Code 2916.1

* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.


30 other products in the same category: