Bondtech HeatLink
search
  • Bondtech HeatLink
  • Bondtech HeatLink
  • Bondtech HeatLink
  • Bondtech HeatLink
  • Bondtech HeatLink
  • Bondtech HeatLink
Compare
You must be logged in to manage your wishlist.

Bondtech HeatLink

BONDTECH-HEATLINK-MOLEXMX50
4.90 € 4.90 €
Tax excl.
Version
Quantity

Do you need more than 1 units?
Please, contact us.

In stock 1 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 26 December
Available

Bondtech's HeatLink system is a set of 50 mm long adapter cables that allow heaters and thermistors with a Molex Microfit 3.0 connector to be connected to virtually any printer.

Video 1: Bondtech thermistor and heater with Molex Microfit 3.0 connector. Source: Bondtech

The HeatLink system currently consists of six different adapters:

  • HeatLink Molex MX-50-57-9002: This is an adapter with a Molex Microfit 3.0 terminal on one end and a Molex MX-50-57-9002 connector on the other. It allows to connect the Bondtech 300 ºC thermistor to Prusa Mk3/S/+, Mk2.5/S and Mk2/2 printers.

MX-5057-9002

Image 1: Connector MX-50-57-9002. Source: Bondtech

  • HeatLink Ferrule: This is an adapter with a Molex Microfit 3.0 terminal on one end and two crimp terminals on the other. It allows the Bondtech 50W heater to be connected to multiple Prusa and Creality printers.

Crimp terminals

Image 2: Crimped terminals. Source: Bondtech

  • HeatLink JST SMP-02V-BC: This is an adapter with a Molex Microfit 3.0 male terminal on one end and a JST SMP-02V-BC connector on the other. It allows to connect both the 300°C thermistor and the Bondtech 50W heater to the Creality Ender 5 printers.

JST SMP-02V-BC

Image 3: JST connector SMP-02V-BC. Source: Bondtech

  • HeatLink JST VHR-2N: This is an adapter with a Molex Microfit 3.0 terminal on one end and a JST VHR-2N connector on the other. It allows the Bondtech 50W heater to be adapted to Creality CR10 series printers.

JST VHR-2N

Image 4: JST connector VHR-2N. Source: Bondtech

  • HeatLink JST XHP-2: This is an adapter with a Molex Microfit 3.0 terminal on one end and a JST XHP-2 connector on the other. It allows the Bondtech 300°C thermistor and 50W heater to be used in multiple Creality printers.

JST XHP-2

Image 5: JST connector XHP-2. Source: Bondtech

  • Heatlink JST XH-2 With Lock: This is an adapter with a Molex Microfit 3.0 terminal on one end and a locking JST XH-2 connector on the other. It allows the Bondtech 300°C thermistor to be fitted to some of Creality's CR-10 series printers.






JST XHP-2

Image 6: JST connector XHP-2 with locking. Source: Bondtech.
Model Conectors Compatibility
Bondtech Thermistor 300 ºC Bondtech 50W heater
HeatLink™ Molex MX-50-57-9002 1: Molex micro-fit 3.0
2: Molex MX-50-57-9002		 Prusa i3 MK3/s/+
Prusa i3 MK2/s
Prusa i3 MK2.5/s		 -
HeatLink™ JST SMP-02V-BC 1: Molex micro-fit 3.0
2: JST SMP-02V-BC		 Creality Ender-5
Creality Ender-5 Pro
Creality Ender-5 Plus		 Creality Ender-5
Creality Ender-5 Pro
Creality Ender-5 Plus
HeatLink™ JST VHR-2N 1: Molex micro-fit 3.0
2: JST VHR-2N		 - Creality CR-10sPro
Creality CR-10sProV2
Creality CR-10Max
Creality CR-10V2
Creality CR-10V3
HeatLink™ JST VHR-2N 1: Molex micro-fit 3.0
2: JST XHP-2		 Creality Ender-3
Creality Ender-3 Pro
Creality Ender-3 V2
Creality CR-10
Creality CR-10 mini
Creality CR-10 s
Creality CR-10 s4
Creality CR-10 s5
Creality CR-5 Pro
Creality CR-6 SE
Creality CR-6 Max
Creality CR-X
Creality Ender-6		 Creality CR-6 SE
Creality CR-6 Max
Creality Ender-6
HeatLink™ JST XH-2 With Lock 1: Molex micro-fit 3.0
2: JST XH-2 With Lock		 Creality CR-10s Pro
Creality CR-10s Pro V2
Creality CR-10Max
Creality CR-10V2
Creality CR-10V3		 -
HeatLink™ Ferrule 1: Molex micro-fit 3.0
2: Crimp terminals		 - Prusa i3 MK3/s/+
Prusa i3 MK2/s
Prusa i3 MK2.5/s
Creality CR-10
Creality CR-10 mini
Creality CR-10 s
Creality CR-10 s4
Creality CR-10 s5
Creality CR-20 Pro
Creality CR-5 Pro
Creality CR-X
Creality Ender-3
Creality Ender-3 Pro
Creality Ender-3 V2
Bondtech Heat Link
Table 1: Compatibility of different HeatLink models. Source: Filament2Print.

Thanks to the HeatLink system, it is easier to adapt any thermistor to heater with a Molex Microfit 3.0 connector, such as the 300°C thermistor or the 50W heater from Bondtech, in Prusa or Creality printers.

General information
Manufacturer Bondtech

Dimensions and weight
Dimensions L 50 mm

Other
HS Code 8477.9

Each Heatlink model includes two connectors: a Molex Microfit 3.0 connector, which will connect to the thermistor or heater cartridge, and another connector that will connect directly to the printer board. Heatlink adapters use standard connectors, so they are compatible with virtually any printer in addition to those listed in the compatibility chart. To find out which HeatLink is suitable for a printer not listed in the table, please check the printer board for the type of connection used.

Please note that the same printer may require different HeatLinks for the thermistor and the heater.