

On Thursday, May 1st, and Friday, May 2nd, we will remain closed due to a holiday. Orders received from Wednesday, April 30th at 5:00 PM (GMT+2) will be shipped on Monday, May 5th. |
These Ziflex Starter Kit build plates for resin 3D printers are high quality build plates from Zimple3D, with magnetic fixation and high temperature resistance. The Ziflex build plates are available in many sizes and are compatible with a wide range of resin 3D printers by brands such as Creality, Phrozen, Flashforge or Anycubic:
Dimensions (mm) | Compatible 3D printers |
---|---|
135 x 75 | Elegoo Mars / Mars Pro / Phrozen Sonic 4k / Sonic Mini 4k / Monoprice Mini Deluxe SLA |
140 x 84 | Elegoo Mars 2 / Mars 2 Pro / Nova3D Bene 4 / Elfin 2 Mono SE |
150 x 95 | Elegoo Mars 3 / Mars 3 Pro / Mars 3 Ultra 4k |
168 x 90 | - |
195 x 122 | Phrozen Shuffle XL 2018/2019 / Shuffle XL Lite 2020 / Make XL / Sonic XL 4k / Creality Halot Sky / Halot Lite / LD-006 |
196 x 126 | Elegoo Saturn V2 / Voxelab Proxima 8.9" 4k / Flashforge Foto 8.9 |
200 x 125 | Phrozen Sonic Mighty 4k / Sonic XL 4k 2022 |
202 x 128 | Anycubic Photon Mono X / Photon Mono X 6k / Photon X / Photon M3 Plus / Sain Smart KL-9 |
224 x 129 | Elegoo Saturn 8k / Saturn 2 8k |
237 x 127 | Phrozen Sonic Mighty 8k |
286 x 166 | Elegoo Jupiter / Peopoly Phenom |
292 x 166 | Phrozen Transform / Transform Fast / Peopoly Forge |
310 x 174 | Anycubic Photon M3 Max |
351 x 191 | Phrozen Sonic Mega 8K |
The Ziflex Starter Kit resin build plates use the new ZXF technology that ensures that the build plate will not fall off during printing due to the weight of the part. The build plate is composed of two layers:
The upper layer is a steel magnetic plate with a 2 mm thickness. This layer has an engraved surface coating for extra strong adhesion of any 3D printing resin used. Attached to the upper layer is a 0.5 mm magnetic base with 3M adhesive, resistant to solvents and chemicals.
Apart from ensuring great adhesion, the Ziflex build plate also offers great flexibility. This means that the build plate can be bent easily to facilitate model removal without damaging the part.
Before proceeding to install the Ziflex resin build platform on your 3D printer, please make sure that the platform is compatible with your equipment. In case of doubts on installation or compatibility, please contact the manufacturer Zimple3D.
Please keep in mind that once the Ziflex build platform has been installed and used, refunds or returns cannot be issued. Once the build plate has been successfully installed, it is necessary to perform Z-offset recalibration due to the added thickness.
General information |
|
Manufacturer | Zimple3D |
Other |
|
HS Code | 8421.9 |
The Ziflex resin build platforms can be adapted to many different 3D printers, including printers using autocalibration (except for certain inductive autocalibration systems). In case of compatibility doubts, the user should contact Zimple3D before attempting to install the build plate.
Given the wide compatibility with various resin 3D printers, the risk of incorrect installation by the user is increased. This is due to the fact that calibration and settings vary from one 3D printer to another. Please follow the installation advice videos to ensure correct installation.
Please keep in mind that once the Ziflex build platform has been installed and used, refunds or returns cannot be issued. This is why it is absolutely crucial to make sure that the Ziflex build platform is compatible with the printer, and that the installation instructions are understood.
Build plates for resin 3D printers. Great adhesion and easy removal of the models.