Z-ESD V2
search
  • Z-ESD V2
You must be logged in to manage your wishlist.

Zortrax Z-ESD V2

ZORTRAX-ZESD-BLACK-800
109.00 € 109.00 €
Tax excl.
Diameter
Format
Colour
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 4 - 8 days
Available for shipment within 4 - 8 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Zortrax is a Polish company founded in 2013 and focused on the development of professional 3D printing systems. Its main strength is the excellent optimisation and integration between its 3D printers, materials and software. This greatly simplifies the entire printing process, minimising set-up times and reducing the likelihood of failure to a minimum, making them ideal systems for professional environments.

Zortrax offers a wide range of technical materials perfectly optimised for best results in conjunction with its LPD printers, including ABS, ASA, PCABS, Nylon, HIPS and others.

Z-ESD V2 is a PET-based filament with a surface resistivity between 10^6 and 10^9 Ω/sq, so components made with this filament provide excellent protection against electrostatic discharge.

Hard disk drive enclosure made of Z-ESD.

Image 1: Hard disk housing made of Z-ESD. Source: Zortrax.

It is a material of particular interest in the electronics industry as well as in the production of scientific and precision equipment and components, because in addition to its excellent antistatic properties, it has a high resistance to acids, alcohols and alkaline substances.

Conductivity meter housing made of Z-ESD.

Image 2: Conductivity meter housing made of Z-ESD. Source: Zortrax.

It also has low shrinkage on cooling, which gives it excellent dimensional stability and reduces the likelihood of warping on large parts.

Electronic housing made of Z-ESD.

Image 3: Electronic housing made of Z-ESD. Source: Zortrax.

For all these reasons, Z-ESD V2 is the ideal material for the production of protective housings for sensitive electronic equipment or equipment to be handled in industrial environments.

General information

Material PET
Format 800 g
Density 1.35 g/cm³
Filament diameter 1.75 mm
Filament tolerance - mm
Filament length 258.8

Electrical properties

Volumetric resistivity (IEC 60093) 10⁵ - 10⁷ Ω*cm
Surface electrical resistivity (ASTM D 257) 10⁵ - 10⁸ Ω/cm²

Printing properties

Printing temperature 240 ºC
Print bed temperature 80 ºC
Chamber temperature -
Cooling fan -
Recommended printing speed - mm/s

Mechanical properties

Izod impact strength 4.92 KJ/m²
Elongation at break 4.46 %
Tensile strength (ISO 527) 32.88 MPa
Tensile modulus (DIN 53457) 2300 MPa
Flexural strength 47.7 MPa
Flexural modulus (ISO 178) 1500 MPa
Surface hardness Shore 69.2 D

Thermal properties

Softening temperature 78 ºC

Specific properties

Transparency -
Chemical resistance

Other

HS Code 3916.9
Spool diameter (outer) - mm
Spool diameter (inner hole) - mm
Spool width - mm

When selecting this material in the Z-Suite software, the Z-ESD 2 profile must be selected. If the previous version of this material is available, the appropriate profile will be Z-ESD.

Z-ESD 2 is only compatible with Zortrax M200 Plus and M300 Plus printers.

Featured properties

Printing temperature
240 ºC
Filament diameter
1.75 mm
ESD
Yes
Density
1,35 g/cm³

Related products