Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Nylon Taulman 230

Ref.: TLM-NYL-230-175-450

41.95 €

Tax excl.

Diameter

Format

Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Out of Stock

Returns

Ask about this product

Taulman Nylon 230 filament is the first of the 3D printer filaments Taulman developed, which is designed to printing at low temperature. This filament is printed with a temperature ranging between 225 and 235 ° C.

In addition, to print this filament is not necessary to use hot bed, it can be perfectly printed on a cold bed, on which Blue Tape should be placed.

Thanks to this Taulman Nylon 230 filament can be used in any 3D printer. Thus, with 230 Taulman Nylon filament makes available to any user of 3D printer the ability to print using heavy-duty piece Nylon Taulman.

In the following article you can see the main differences of nylon Taulman 3D filaments.

General information
Material	PA
Format	50 g / 450 g
Density	1.25 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	± 0.05 mm
Filament length	(Ø 1.75 mm - 0.45 Kg) ± 149 m / (Ø 2.85 mm - 0.45 Kg) ± 56 m

Printing properties
Printing temperature	228 - 235 ºC
Print bed temperature	55 ºC
Chamber temperature	✗
Cooling fan	✗
Recommended printing speed	- mm/s

Mechanical properties
Elongation at break	417 %
Tensile strength	34 MPa
Tensile modulus	73 MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	-

Thermal properties
Melting temperature	195 ºC
Softening temperature	68 ºC

Specific properties
Transparency	-
Flammability classification	UL 94 HB / UL 94 V2 @ 1.5 mm

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	50 mm
Spool width	50 mm

Nylon Taulman 230 filament must be used at a temperature between 228 and 235°C. The manufacturer's Taulman recommended temperature is 230ºC. No need to use hot bed, you only have to place a layer of Blue Tape or 3DLac on the bed printing. In case of having warm bed, it is advisable to use a temperature of 45ºC.

In terms of printing speed, Nylon Taulman 230 filament to print at a speed that is 70-80% speed normally use the 3D printer to print with ABS or PLA.