Crisol para sinterizado
search
Compare
You must be logged in to manage your wishlist.

Crucible for sintering

A0-CRISOL
29.00 € 29.00 €
Tax excl.
Size
Quantity

In stock 3 units available for immediate shipping.
units available for shipping in 4 - 7 days Available for shipment within 4 - 7 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 22 November
Available

In order to obtain 100 % metallic pieces with the metallic filaments of The Virtual Foundry, it is necessary to subject the pieces to a sintering process. This process seeks to eliminate the polymer (PLA) existing in the piece and fuse the metal without losing the original shape. This process requires an oven (open or vacuum / inert), refractory powder and crucible.

The crucible is a ceramic recipient in the form of a vessel where the piece to be sintered, covered with refractory dust, is introduced. It is manufactured with a mixture of graphite, silicon carbide and clay to offer the ideal properties for sintering: good thermal conductivity, high thermal resistance (up to 1600 ºC) and good resistance to thermal shock.

This crucible is compatible with all types of ovens (gas or electric) and to perform the sintering process or melting gold, silver, bronze and other non-ferrous metals. To meet the needs of each user, the crucible is available in different sizes, which conform to the standard measurements of each type and size of oven.

Crucible measures
Model Dimensions 
(A x H x B mm)
A0 60 x 67 x 41
A0.5 70 x 80 x 40
A1 79 x 97 x 55
A2 95 x 109 x 61
A3 105 x 127 x 70
A4 114 x 141 x 76
A6 130 x 165 x 95
A8 156 x 184 x 108
A12 171 x 210 x 121

The user who wishes to obtain 100 % metallic parts after printing a piece with Filamet™, should be clear that, not only does he need a crucible according to the size of his oven, but also the pieces he wishes to sinter. If you do not have an oven with the necessary properties to sinter the printed parts with the Filamet™ and get the final properties of the material, you can contact us and we will assess its viability through our collaborators with the capacity to perform the post-processing necessary to obtain the desired final result.

General information
Manufacturer The Virtual Foundry
Manufacturing material Graphite / silicon carbide / clay

Other
HS Code 6903.9

For sintering in an open or vacuum / inert environment, the same steps must be followed before introducing the crucible into the oven.

Before inserting the piece into the crucible, a 1.25 cm layer of Al2O3 should be placed at the bottom of the crucible, then position the piece on the Al2O3 and in the center, without touching the walls. In the case of sintering several pieces at once, there should be a separation of 1.25 cm between them. Subsequently, the piece is covered with Al2O3, leaving a 1.25 cm layer on the top, beaten in a crucible so that the powder is distributed around the entire piece and crushed so that it is completely compacted.The next step would be to configure the oven with the sintering process according to the metallic filament (Filamet™) that will be used to print the piece.