EPD 3500
search
  • EPD 3500
Compare
You must be logged in to manage your wishlist.

BASF Ultracur3D® EPD 3500

BASF-3500-AMBER
420.00 € 420.00 €
Tax excl.
Colour
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 4 - 6 days Available for shipment within 4 - 6 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 28 November - Monday 2 December
Available

BASF is a German manufacturer specialising in the development of chemical products. Its product range includes products for the production of 3D printing materials for FDM, resin and SLS.

Ultracur3D® EPD 3500 resin is a resin for daylight resin technology, i.e. for use in visible light printers such as Photocentric printers. Daylight is a lower energy, longer wavelength light that ensures more reliable polymerisation than UV light.

Photocentric has teamed up with BASF to create a range of Engineering Plastic Daylight (EPD) materials for a wide range of applications.

Forward AM's Ultracur3D® EPD 3500 resin is lightfast, daylight resistant, with high strength, high stiffness and very good impact resistance. This makes it an ideal solution for engineering prototypes.

Pieza impresa con ultracur 3500

Image 1. Part printed with Ultracur3D® EPD 3500 resin. Source: Forward-am

This resin has a low water absorption and is ideal for the creation of tools, customised utensils, parts that require a lot of detail and is also ideal when translucency is required thanks to its amber colour.

Curing, washing, and sintering properties
Washing time -
Curing time -
Curing temperature - ºC

General information
Manufacturer BASF
Material Photopolymer
Format 5 kg
Technology EPD
Wavelength - nm
Viscosity (@ 30 ºC) 600 mPa·s / (@ 50 ºC) 160 mPa·s
Density (solid) (ASTM D792) 1.18 g/cm³

Mechanical properties
Izod impact strength - KJ/m²
Charpy impact strength (ISO 179) 1.5 KJ/m²
Elongation at break (ASTM D412C) 18 %
Tensile strength (ASTM D412C) 60 MPa
Tensile modulus 2500 MPa
Flexural strength (ASTM D790) 110 MPa
Flexural modulus (ASTM D790) 2400 MPa
Surface hardness (ASTM D2240) Shore 79 D

Printing properties
Layer height - µm
Layer exposure time -
Layer off time -
Lifting height - mm
Bottom layer exposure -
Bottom layer count -

Thermal properties
Softening temperature 70 ºC
Heat deflexion temperature (ASTM D648) @ 0.45 MPa: 70 ºC / @ 1.82 MPa: 57 ºC

Specific properties
Maximum water absorption (ASTM D570) 24 h: 0.5 %

Other
HS Code 2916.1
Lifetime (since manufacturing) 12 M
General information
Manufacturer BASF
Technology  EPD
Material -
Wavelength -
Format 5 kg
Colour Amber
General properties
Viscosity (30 ºC) 600 mPas
Viscosity (50 ºC) 160 mPas
Density (solid) (ASTM D792) 1.18 g/cm3
Density (liquid)  -
Mechanical properties
Young's modulus (ASTM D638) -
Tensile strength (ASTM D412C) 60 MPa
Elongation at break (ASTM D412C) 18 %
Bending modulus (ASTM D790) 2400 MPa
Bending strength (ASTM D790) 110 MPa
Impact resistance  -
Impact resistance at 23 °C (Izod indented ASTM D256) 25 J/m
Impact resistance at 23 ºC (Charpy indented ISO 179-1) 1.5 kJ/m2
Hardness (Shore D, ASTM D2240) 79
Wear resistance  -
Resilience  -
Compression at 23 ºC, 72h  -
Thermal Properties
HDT to 0.45 MPa (ASTM D648) 70 °C
HDT to 1.82 MPa (ASTM D648) 57 °C
Flammability (UV 94 1.5 mm) -
Other
Service life 12 months
HSCODE 2916.1


* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.

Featured properties

Technology
EPD

Related products