Display Nav Left

Language:

Discontinued Castable Resin (C1)

Compare

You must be logged in to manage your wishlist.

Castable Resin XYZ (SLA)

Ref.: RESIN-XYZ-CAST-C1

Out of Stock

Returns

Ask about this product

The castable resins of XYZ for 3D printing of SLA technology have been developed for the Nobel 1.0 and Nobel 1.0.A, printers, especially for fashion and jewelry applications. There are two different types of castable or castable resin (C1 and F1).

With castable resins, every user (jeweler or designer) can make their creations directly from their 3D design. From CAD software you can print the desired design and within a few hours have a prototype to cast directly.

The two types of resin available to XYZ for your SLA printer are:

Castable / moldable resin (C1)

With this resin you can get pieces with high resolution finishes. Said pieces can be used directly for molding without having to superficially treat the piece previously. The casting process leaves no residue, which makes it an idea for the printing of fashion accessories. This resin is compatible with the 3D printer XYZ Nobel 1.0.A and is available in orange.

Castable / moldable resin (C1)

The moldable resin F1 employs guarantees perfect casting results, with a low coefficient of thermal expansion. The prints have a smooth surface and high print resolution , allowing you to create jewelry more efficiently. The combination of digital design and wax casting processes lost in 3D printing is the trend of jewelry, crafts and custom accessories. This resin is compatible with the 3D printer XYZ Nobel 1.0.A and Superfine and is available in yellow.

Installing the bottle of resin is really simple and is done in just three steps: You must replace the cap, insert the bottle into the 3D printer and finally connect the tube. The material, color, and remaining resin level will automatically be detected and the tank will be automatically filled.

The package includes 2 bottles of 500ml, so the total amount is 1 liter.

If you have an UV curing unit XYZ to perform the correct curing of the pieces once printed. It is important to store the resin with a temperature of between 10 and 32ºC to avoid deterioration of it. In addition, you must have different tanks for each type of resin (material / color) to avoid printing failures.

General information
Manufacturer	XYZprinting
Material	Photopolymer
Format	2 x 0.5 L
Technology	SLA / LED-LCD / DLP
Wavelength	- nm
Compatible 3D printers	C1: Nobel 1.0A / F1: Nobel 1.0A / Nobel Superfine
Viscosity	@ 25 ºC: C1: 300-500 / F1: 150-300
Density (solid)	1.10-1.12 g/cm³

Printing properties
Layer height	- µm
Layer exposure time	-
Layer off time	-
Lifting height	- mm
Bottom layer exposure	-
Bottom layer count	-

Mechanical properties
Izod impact strength	- KJ/m²
Charpy impact strength	- KJ/m²
Elongation at break	- %
Tensile strength	- MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	C1: Shore 35 - 55 D / F1: Shore 55 - 75 D

Thermal properties
Softening temperature	- ºC

Curing, washing, and sintering properties
Washing time	-
Curing time	C1: 10 min / F1: 5 min
Curing temperature	- ºC

Other
HS Code	2916.1
Lifetime (since manufacturing)	- M

Heating of this product is strictly prohibited. Photopolymer resins can generate vapors that can cause discomfort when subjected to high temperatures.
Keep the product in a well-ventilated space out of the reach of children.
Avoid contact of skin or eyes with uncured resin. If accidental contact occurs, immediately rinse the affected area with clean water.
The uncured resin in the tank can solidify if it is exposed to sunlight before it is removed. Therefore, be careful when disposing of uncured resin and do not pour the material directly into the sink.
After printing, any uncured resin on the surface of the printed object should be cleaned with alcohol.