Tips

Our experience in 3D printing allows us to have a wide knowledge about the different technologies and printing materials. In our blog you can find various tips and good practices to extract all their potential.

24/10/2016

How is it possible to avoid jams in the 3d printer extruder

The main areas of an extruder are the heating block and the dissipation area, although these are formed in turn by several parts. To understand the basic operation of the extrusion process of the filaments in 3D printers, it is essential to understand the functionality of both areas.

How is it possible to avoid jams in the 3d printer extruder

28/09/2016

The importance of 3D printers lubrication

In the FDM 3D print the correct lubrication of the moving parts of the 3D printer is critical because it can directly affect the final quality of the printed pieces. If the rods or bearings are poorly lubricated 3D printer, the print carriage may tend to move to blows and generate an annoying noise. In this way you lose accuracy in positioning the print head.

The importance of 3D printers lubrication

09/12/2015

Questions about the usual temperature and print speed of PLA and ABS

Since most users know 3D printing, one of the main parameters that directly affects the finished parts made with 3D printers FDM is the print speed. So the faster print speed will get worse finish and the smaller the better finish. Therefore, the finish can claim to be directly proportional to the time of printing.

Questions about the usual temperature and print speed of PLA and ABS