• $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • Smartfil E.P (Limestone)

    New product

    44 Items

    19,95 €tax excl.
    24,14 €tax incl.

    Ask for information

    The filament E.P Smartfil is composed by PLA (70%) and calcium carbonate (30%) presenting a surface finish similar to the limestone.

    .P Smartfil filament for 3D printing is a material composed of PLA (70%) and Calcium Carbonate-CaCO3 (30%). This filament Smartfil E.P has a surface finish similar to the limestone, which is a sedimentary rock mainly composed of calcium carbonate, hence encompassing it in the category of the filaments finished ceramic or stone.

    The Smartfil E.P (Limestone) filament is very simple to print as it is printed at low temperatures (± 200 ° C) and no warping effect. Regarding the rigidity, it is a filament with a rigidity higher than that of PLA. Another point that stands out in this filament is that it is very easy to machine, polishing, sanding and painting so you can achieve excellent surface finishes.

    Because of its excellent sanding, its excellent print resolution, and its ceramic finish that can be painted with any paint; Smartfil E.P the filament is ideal for users of 3D printing sectors engaged in handicrafts, architecture, ethics, model making, sculpture, etc.

    Once used the Smartfil EP (Limestone) filament your 3D printer, it is highly recommended you remove the filament of the 3D printer and upload filament cleaning for one minute to remove any impurities from calcium carbonate that may remain inside the extruder and not eliminate them could cause a jam.  In the tab usage tips you can find more information about how to use this in your 3D printer filament to obtain good results.

    The filament Smartfil EP Limestone (1.75mm or 2.85 mm) is made of high quality PLA, without recycled material and fully stabilized with a variability of ± 0.03 mm diameter which produces warping and which is obtained an excellent resolution printing.

    Furthermore coils 750 grams of filament Smartfil EP (1.75mm or 2.85 mm) are packaged in the Smart Bag that is a novel multilayer packaging that is recyclable and reusable and is used to store and protect a single coil filament several times offering greater protection against external agents such as humidity.


    E.P. Smartfil Data Sheet_ES

    Data Sheet E.P. Smartfil in Spanish

    E.P. Smartfil Data Sheet_EN

    Data Sheet E.P. Smartfil in English

    E.P. SMF Safety Data Sheet_EN

    Safety data sheet E.P. Smartfil in English

    E.P. SMF Safety Data Sheet_ES

    Safety Data Sheet E.P. Smartfil in Spanish

    The ideal temperature printing should be close to 200 °C and about the temperature of the base need not have hot bed to print this filament because no warping effect, however in the case of having a printer 3D printing hotbed advised her to 40-60 °C.

    A very important aspect to consider is that not recommended print with a height lower layer 0.1mm with this filament Smartfil E.P because it could cause possible blockages in the extruder.

    • Plastic Type: PLA (70%) and CaCO3-Calcium Carbonate(30%).
    • Place of manufacture: Spain by "Smart Materials 3D" with the most sophisticated current manufacturing technologies.
    • Color: White - "Ivory White"
    • Recommended print temperature: ± 200 °C
    • Temperature bed based printing: 0-60 °C
    • Softening / Thermal resistance (ISO 306): 75 °C
    • Format: Spools of 750gr or pack of 50gr
    • Density (ISO 1183): 1.10 g/cm3
    • Resistance to break IZOD (ASTM D256): 18 KJ / m2
    • Tensile strength (ASTM D638): 405 Kg / cm2
    • Rockwell surface hardness (ISO 2019-1): 90 MPa
    • Flexural strength (ISO 178): 520 Kg / cm2
    • 750gr spool diameter: 200mm
    • 750gr spool Width: 70mm
    • Inner hole diameter spool of 750gr: 55mm
    • Weight Shipping 750gr spool: 1.3 Kg
    • HS Code: 3916.9

    6 other products in the same category: