Novus 1



Temporarily out of stock

New product

22,00 €
22,00 €

Ask for information

Valid acrylic cleaner to clean the most delicate areas of 3D printer.

The Novus 1 is an essential acrylic cleaner to keep the Resin Tank Standard and the Resin Tank LT of Form 2 fully operational. This acrylic liquid gently cleans all types of plastics without scratching them, leaves a shine resistant to fogging, repels the dust and eliminates the static charge.

To obtain 3D prints without problems it is essential that both the Form 2, glass and the transparent base of the Resin Tank Standard and the Resin Tank LT are completely free of dust and fingerprints, dirt that can deflect the laser from the 3D SLA printer, giving a failed impression.

It is recommended to use Novus 1 acrylic cleaner in combination with PEC*PAD wipes to keep Form 2 always fully operational.

Isopropyl alcohol shouldn't be used to clean the cover or resin tanks as it may cause cracks and damage to the surfaces on which it is applied.

1. Remove the build platform and the resin tank

Video 1: Remove the build platform and the resin tank. Source: FormLabs

2. Spray Novus 1

Video 2: Spray Novus 1. Source: FomLabs

3. Clean the surface

Video 3: Clean the surface. Source: FomLabs 

After applying the Novus 1 acrylic cleanser and using a PEC*PAD wipe with long and continuous movements, without applying excessive force, to remove all dust dirt and finger marks successfully. If necessary, the process will be repeated until the surface is completely clean.

4. Inspect the surface

Video 4: Inspect the surface. Source: FormLabs



You can't use IPA or any paper or cloth towel to clean the inside of the tank.

Manufacturer Novus Inc.
Quantity 237 ml
HS Code 3402.2
Hazard and precautionary statements Skin irritation
CLP Regulation (EC) 1272/2008. For more information, consult the product safety data sheet.

30 other products in the same category: