Light Curing Putty Phrozen View larger

Light Curing Putty Phrozen



New product

13 Items

16,52 €
16,52 €

Ask for information

UV-curable putty for fixing and retouching cured parts 3D printed in resin.

This Light Curing Putty by Phrozen was designed for the purpose of restoring broken parts into their original state and filling gaps and holes in models. The putty has a gel-like consistency and is meant to be applied to cured resin and plastic. Once cured, the putty can be sanded and painted to conceal the retouched section.

The Light Curing Putty has a gel-like consistency

Image 1: The Light Curing Putty has a gel-like consistency. Source: Phrozen.

The putty cures rapidly rapidly under UV light exposure in 15 seconds although this will largely depend on the thickness of the section to be cured. This fast curing time allows for quick and efficient modifications of the model.

Parts fixed with the Light Curing Putty

Image 2: Parts fixed with the Light Curing Putty. Source: Phrozen.

The application of the Light Curing Putty is very easy to use thanks to its gel consistency and the provided wooden stick. The putty can be cured with any curing lamp with LED wavelengths of ≥395 nm but it is recommended to use the Phrozen Cure Beam for this task since it can reach even in narrow intersections and inner parts of the model.

The Phrozen light curing putty should be applied in the following way:

  1. First, the surface of the part to be repaired should be cleaned from any dust and impurities.
  2. Next, the putty should be applied with the provided wooden stick.
  3. The excess of the putty should removed and smoothed with alcohol.
  4. The part should be exposed to Phrozen Cure Beam or other curing lamp with LED wavelengths of ≥395 nm for about 15-30 seconds (curing time varies depending on the part's thickness). For the best results, a distance of 1 cm should be kept to ensure that the light can enter through the bottom of the model.

The light curing putty should be stored in a dry environment, away from direct sunlight. When handling the putty, the user should always wear protective gloves to avoid burns or skin irritation. More technical and safety information on this product can be found in the Downloads section.

General information
Content x1 light curing putty
x1 wooden stick
Color Before curing: light yellow paste
After curing: solid white
Tensile strength 130-160 kg/cm2
Hardness Shore 76-80 D
Density 1.3-1.4 g/cm3
Weight 60 g
Additional information
HS Code 3810.1


30 other products in the same category: