Do you need more than 5 units? Please, contact us.
Product temporarily out of stock with these characteristics. Select another combination.
We notify you when it will be available:
LOCTITE - Instant 401
LOCTITE, a brand known internationally for its adhesives, belongs to the Henkel group, which dedicates its work to produce and develop all types of domestic and industrial chemical products. LOCTITE has developed the Loctite 401 instant glue, which is ideal for the 3D printing sector due to its composition.
The LOCTITE 401 is a cyanoacrylate glue with an ultra fast cure and a single component, it cures in a few seconds. It is ideal for gluing printed pieces of all kinds, FDM, SLA, DLP, even pieces made with technologies with a porous finish (SLS and MJF). Thanks to its low viscosity, this glue is perfectly introduced by the layers of the printed pieces, even if they are not very porous, resulting in a perfect union and without altering the final geometry of the joint (separation <0.1 mm). In addition, the LOCTITE 401 is ideal for bonding casting resins, since it does not generate ashes.
This glue allows you to make larger pieces without the need for a larger 3D printer. To make these joints, LOCTITE recommends different geometries depending on the type of resistance that the piece that you want to carry out must support. Below are the types of recommended joints:
The LOCTITE 401 is ideal for ultra fast joints of parts that are manufactured in all types of 3D printers and to repair the breakage of any of them.
The following are the recommended steps that should be performed at the time of the paste process:
Ultra fast curing glue perfect for 3D printing.