PA Rail View larger

PA Rail pellets

Nanovia

New product

2 Items

35,00 €
35,00 €

Ask for information

Nylon and flame retardant ceramic pellets suitable for the railway sector.

Nanovia PA-6 Rail are pellets composed of polyamide (nylon) and flame retardant ceramics certified by the NF EN 45545-2 standard for fire protection of railway vehicles, due to their non-flammability, low smoke emission and absence of toxics.

Nanovia's PA Rail pellets are designed for the railway sector, and with them it is possible to create parts resistant up to 100ºC.

  • PA-6 Rail pellets can be used in the manufacture of filament for FDM 3D printers using Filastruder or any other filament extruder.
  • It is possible to use a pellet extruder for 3D printing directly.

With the combination of PA-6 Rail pellets and a good filament extruder such as Filastruder, it is possible to obtain 3D printing filament with qualities similar to those of a commercial filament. 

When using PA-6 Rail Pellets to make filament with a filament extruder such as Filastruder or using a pellet extruder for direct 3D printing, it should be noted that the extrusion temperature must be regulated in relation to the extrusion speed used. For optimal results, it is recommended to read the product's usage tips.

It is recommended to print Nanovia PA Rail in a room with air extraction or using suitable ventilation equipment.

Further information, technical and safety data can be found in the "Downloads" section.

General information
Material PA Rail
Manufacturer Nanovia
Format

-

Density 1.49 g/cm3
Colour Black 
Mechanical properties
Izod impact resistance (ASTM D256) -
Charpy impact resistance  -
Ultimate breaking strength -
Maximal deformation at break -
Tensile strength (ASTM D638) -
Tensile modulus (ISO 6721) -
Bending strength (ISO 178) -
Bending modulus  -
Surface hardness -
Thermal properties
Processing temperature -
Glass transition temperature -
Melting temperature -
MFR Ratio -
Surface resistivity -
Flammability (UL 94 @1.5 mm) -
Additional information
HS Code 3901.1


* The typical values listed in this table should be considered as a reference. We advise you to confirm the final results and properties with your own tests. For further information please refer to the product data sheet.

30 other products in the same category: