Cr SiC View larger

Cr SiC pellets


This product could be delivered in a period exceeding the standard.

New product

138,15 €
138,15 €

Ask for information

Silicon carbide loaded pellets ideal for abrasive and refractory applications.

Silicon carbide is a material that stands out for its hardness, being almost as hard as diamond, reaching hardnesses on the Mohs scale of 9 to 9.5. In addition, it is a semiconductor and refractory material that has many advantages for use in devices that involve working under extreme conditions of temperature, voltage and frequency.

Silicon carbide pellets are 71 % by mass loaded with fine particles of silicon carbide (SiC).

  • Pellets can be used in the manufacture of filament for FDM 3D printers using Filastruder or any other filament extruder.
  • It is possible to use a pellet extruder for 3D printing directly.

With the combination of Cr SiC Pellets and a good filament extruder such as Filastruder, it is possible to obtain 3D printing filament with qualities similar to those of a commercial filament.

When using Cr SiC Pellets to make filament with a filament extruder such as Filastruder or using a pellet extruder for direct 3D printing, it should be noted that the extrusion temperature must be regulated in relation to the extrusion speed used.

Thanks to its properties, Silicon Carbide pellets can be very useful for the manufacture of diodes, transistors, suppressors, etc. In addition, due to its high temperature resistance, silicon carbide is also ideal for abrasive and refractory applications.

Recomenda-se armazenar as pastilhas de SiC CR num local seco e escuro, se possível com um dessecante.

General information
Material Cr SiC
Manufacturer Nanovia

900 g bag

5 kg bag

Density 2.66 g/cm3
Colour Grey
Mechanical properties
Izod impact resistance (ASTM D256) -
Charpy impact resistance  -
Ultimate breaking strength -
Maximal deformation at break -
Tensile strength (ASTM D638) -
Tensile modulus (ISO 6721) -
Bending strength (ISO 178) -
Bending modulus  -
Surface hardness -
Thermal properties
Processing temperature -
Glass transition temperature -
Melting temperature -
MFR Ratio -
Surface resistivity -
Flammability (UL 94 @1.5 mm) -
Additional information
HS Code 3901.1

* The typical values listed in this table should be considered as a reference. We advise you to confirm the final results and properties with your own tests. For further information please refer to the product data sheet.

30 other products in the same category: