PC Pellets
search
Compare
You must be logged in to manage your wishlist.

PC pellets

PELLET-PC-1KG
22.15 € 22.15 €
Tax excl.
Format
Quantity

In stock 1 units available for immediate shipping.
units available for shipping in 2 - 4 days Available for shipment within 2 - 4 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 5 December
Available

Polycarbonate (PC) is a transparent, amorphous plastic with good mechanical properties. It is a very rigid, tough material with good resistance to oils, greases and solvents; it is also a good electrical insulator. Polycarbonate is a material widely used in industry, especially in the electrical industry.

Nowadays it is common to find parts made of PC in homes, industry or architecture thanks to its high resistance to impact, temperature and surface finish.

PC pellets are small cylinders of the highest quality material and do not incorporate recycled or recovered material.

Pellets de PC.
Image 1: Polycarbonate pellets. Source: Filament2print.

Thanks to these qualities, PC pellets are perfect for 3D printing, achieving high print quality. There are several methods for using pellets in 3D printing:

  • PC pellets can be used in the manufacture of filament for FDM 3D printers using Filastruder or any other filament extruder.
  • It is possible to use a pellet extruder for direct 3D printing.


With the combination of PC Pellets and a good filament extruder such as Filastruder, it is possible to obtain 3D printing filament with qualities similar to those of commercial PC filament.

When using PC Pellets to make filament with a filament extruder such as Filastruder or using a pellet extruder for direct 3D printing, it should be noted that the extrusion temperature must be regulated in relation to the extrusion speed used. For optimal results, it is recommended to read the product's usage tips.

General information
Manufacturer Smart Materials
Material PC
Format 1000 g / 5000 g
Density 1.20 g/cm³

Mechanical properties
Elongation at break 6 %
Tensile strength 66 MPa
Tensile modulus 2400 MPa
Flexural strength 90 MPa
Flexural modulus 2000 MPa
Surface hardness -

Electrical properties

Thermal properties
Melting temperature - ºC
Softening temperature - ºC
Processing temperature 285 ºC
MFR Ratio -
Glass transition temperature - ºC
Heat deflexion temperature - ºC

Specific properties
Chemical resistance ✓

Other
HS Code 3901.1

In excessively humid environments, PC pellets can absorb moisture and present problems when 3D printing. These problems can lead to poor quality prints. It is therefore advisable to keep the material in an airtight bag together with a desiccant bag.

Related products