Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesTough as ABS, with a Shore D value of 70, this FFF polyurethane thermoplastic allows semi-rigid structural components to recover their shape despite significant deformations caused by brutal impacts. Nanovia 70D TPU is capable of stretching three times its original length and is hard enough to be further treated. UV resistant, this filament is suitable for outdoor use.
TPU (Thermoplastic Polyurethane) is a thermoplastic, a linear elastomer polymer belonging to the polyurethane family. Within TPU, different hardness ranges can be found. TPU 70D filament has a Shore hardness of 70D and is therefore considered a semi-rigid material due to its high hardness.
Despite its stiffness, this filament has other properties of TPU such as:
This TPU 70 D is suitable for outdoor use, and ideal for wheels, soles, pipes, shock absorbers, orthopaedic prostheses, safety equipment, etc.
Its advantages include:
For further technical or security information, please refer to the "Downloads" section.
General information | |
---|---|
Manufacturer | Nanovia |
Material | TPU 70D |
Format | Spool of 500 g |
Density | 1.12 g/cm3 |
Diameter of filament | 1.75 o 2.85 mm |
Diameter tolerance | - |
Filament length | - |
Color | Translucid, black |
RAL/Pantone | - |
Print settings | |
Printing temperature | 230 – 250 °C |
Print bed temperature | 60 – 80 °C |
Chamber temperature | - |
Printing speed | 20 – 70 mm/s |
Mechanical properties | |
Izod impact strength | - |
Charpy impact strength | - |
Elongation at break (ISO 527) | 320 % |
Tensile strength (ISO 527) | 28 MPa |
Tensile Modulus | - |
Flexural strength | - |
Flexural modulus | - |
Surface hardness | Shore 70D |
Thermal properties | |
Softening temperature - | - |
Melting temperature | - |
Specific properties | |
Transparency | - |
Additional Information | |
HS Code | 3916.9 |
Diameter coil (outer) | - |
Diameter coil (inner hole) | - |
Coil Width | - |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
66,10 €
145,00 €
35,95 €
24,71 €
69,84 €
29,95 €
42,98 €
79,99 €
27,48 €
28,10 €
19,42 €
53,00 €
130,00 €
43,00 €
84,90 €
41,28 €
95,00 €
170,00 €
190,00 €
75,00 €
75,00 €
95,00 €
95,00 €
110,00 €
105,00 €
95,00 €
32,95 €
28,02 €