Dental Study Model resin Phrozen


New product

2 Items

61,95 €
61,95 €

Ask for information

Affordable and fast resin for applications in dentistry and orthodontics.

Affordability and printing speed are crucial factors in additive manufacturing for the dental sector. The Phrozen Dental Study Model resin was designed to have exactly those characteristics. With an astonishing printing speed of 1.5 seconds per layer, the Dental Study Model resin can complete a full-arch model in under 25 minutes.

A dental model 3D printed with the Dental Study Model resin

Image 1: A dental model 3D printed with the Dental Study Model resin. Source: Phrozen.

Parts 3D printed with the Dental Study Model have a matte white finish, which makes this material highly suitable for applications where aesthetics and patient comfort matter as much as a great fit and dimensional accuracy.

3D printed dental models are an affordable aid in dentistry and orthodontics

Image 2: 3D printed dental models are an affordable aid in dentistry and orthodontics. Source: Phrozen.

Sectors such as cosmetic dentistry, oral surgery, and orthodontics planning can benefit from essential diagnostic aids and dental models 3D printed with the Phrozen Dental Study Model resin. Such aids help patients to better understand their issues and the treatment required in advance.

Elongation at break (%) 7
Tensile strength (MPa) 28
Tensile modulus (MPa) 920
Surface hardness 9

Once opened, Phrozen Dental Study Model resin must be stored properly to prevent degradation of the resin. To achieve the desired properties, parts 3D printed with Dental Study Model resin must be post-processed. The parts must first be washed in IPA alcohol or any other authorized resin cleaning liquid and then post-cured under UV light. Washing and curing can be done with the help of devices such as the Phrozen Cure & Wash Kit or the Cure XL or Cure Mega curing devices.

More information on the maintenance of Phrozen resins and post-processing of 3D printed parts can be found in the Manual in the Downloads section.

General information
Manufacturer Phrozen
Technology  LCD
Material Photopolymer
Wavelength 405 nm
Format 1 kg
Color White
Compatible 3D printers LCD
Printing properties
Layer height -
Layer exposure time -
Layer cooling time -
Lifting height -
Exposure of bottom layers -
Number of bottom layers -
Curing and washing properties
Washing time -
Curing time -
Curing temperature -
Mechanical properties
Izod impact resistance (ASTM D256) 24 J/m
Charpy impact resistance -
Elongation at break (ASTM D638) 7 %
Tensile strength (ASTM D638) 28 MPa
Tensile modulus (ASTM D638) 920 MPa
Flexural strength -
Flexural modulus 
Surface hardness (ASTM 2240) Shore 90 D
Thermal properties
Softening temperature -
Brightness value -
Additional information
Service life -
HS Code 2916.1

* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.


30 other products in the same category: