Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesWarning: Last items in stock!
Availability date:
BASF is a German manufacturer specialising in the development of chemical products. Its product range includes products for the production of 3D printing materials for FDM, resin and SLS. These products fall under the well-known Ultrafuse, Ultracure and Ultrasint brands.
Ultracur3D® DMD 1005 resin is a resin intended for daylight resin technology, i.e. for use in visible light printers such as Photocentric brand printers. Daylight is a lower energy, longer wavelength light that ensures more reliable polymerisation than UV light.
This brand, Photocentric, has teamed up with BASF to create a range of Engineering Plastic Daylight (EPD) materials for a wide range of applications.
The daylight dental resin, currently available in beige, is ideal for the creation of dental models and moulds that can be achieved at low cost, with high precision and thermoformability.
Medical use | Medical use |
Before starting a print, the resin should be shaken well and, if possible, vacuumed to remove any bubbles that may have formed.
Once printed, the pieces should be cleaned with isopropyl alcohol. To do this it is advisable to immerse the pieces in a container with isopropyl alcohol and place this container in an ultrasonic cleaner for 4 minutes. It is recommended not to immerse the piece for long periods of time to avoid deformation and softening.
After cleaning, the pieces should be dried for 30 minutes at 40 ºC. Once dry, parts printed with BASF Ultracur3D resins should be cured at room temperature to obtain optimum properties. Curing conditions will depend on the characteristics of the printer used and the curing equipment.
All customers who have purchased any resin from the BASF Ultracur3D range can request the appropriate user guide. This can be done using the contact form by selecting "Technical Support" in the subject line and the order number of the resin.
General information | |
---|---|
Manufacturer | BASF |
Technology | EPD |
Material | - |
Wavelength | - |
Format | 5 kg |
Colour | Beige |
General properties | |
Viscosity (30 ºC) | 110 mPas |
Viscosity (50 ºC) | 40 mPas |
Density (solid) (ASTM D792) | 1.5 g/cm3 |
Mechanical properties | |
Young's modulus (ASTM D638) | 2710 Mpa |
Tensile strength (ASTM D638) | 60 MPa |
Elongation at break (ASTM D638) | 4 % |
Bending modulus (ASTM D790) | 2400 MPa |
Bending strength (ASTM D790) | 85 MPa |
Impact resistance at 23 °C (Izod indented ASTM D256) | 1.6 J/m |
Impact resistance at 23 ºC (Charpy indented ISO 179-1) | 1.1 kJ/m2 |
Hardness (Shore D, ASTM D2240) | 80 |
Thermal Properties | |
HDT to 0.45 MPa (ASTM D648) | 93 °C |
HDT to 1.82 MPa (ASTM D648) | 73 °C |
Other | |
Service life | 12 months |
HSCODE | 2916.1 |
* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.
249,00 €
265,00 €
249,00 €
46,95 €
349,00 €
171,95 € -5% 181,00 €
499,00 €
90,90 €
187,20 €
249,00 €
46,95 €
790,00 €
124,27 €
299,00 €
399,00 €
260,00 €
299,00 €
265,20 €
256,00 €
29,74 €
349,00 €
156,27 €
439,00 €
65,00 €
73,00 €
365,00 €
169,00 €
61,95 €
41,25 €
105,00 €