1
  • $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • Sharebot XXL Plus - 3D Printer

    Sharebot-XXL-PLUS

    Sharebot

    New product

    4 Items

    3 995,00 €tax excl.
    4 833,95 €tax incl.

    Ask for information

    3D printer ideal for professional users who demand larger print sizes.

    Sharebot XXL Plus is a 3D printer suitable for professional users who want to combine the quality, precision and high volume of print available (680x250x200mm)*. The horizontal development of the printing base allows large prototypes to be made in a single piece.

    Sharebot XXL Plus 3D printer has dimensions of 950x450x410 mm and a weight of 40Kg. It is made of a stainless steel body, which gives it a great strength and consistency. Regarding the technical data, the Sharebot XXL Plus 3D printer has a print volume of 720x250x200mm* with a single extruder that can reach 250ºC and a printing base that can reach up to 90ºC.

    Prints with 1.75mm filament and the minimum layer height is 0.1mm. In addition the Sharebot XXL Plus incorporates an LCD screen that allows to modify the printing speed, the temperature of the extruder and the base, the speed of the fan, etc. It also offers the possibility to print directly through an SD Card.

    On the other hand, Sharebot XXL Plus has a filament sensor that paralyzes printing if the filament of the coil is exhausted or if the 3D printer suffers some type of problem.

    Sharebot XXL Plus is a 3D printer with open software that must be downloaded from the website of Sharebot to always have the latest version. It is also compatible with free software such as slic3r.

    Sharebot XXL Plus is shipped fully assembled, it is only necessary to remove the protective elements, place the printing base, load the filament and start printing in 3D. The delivery time from the confirmation of the can vary between 2 and 5 weeks.

    It is advisable to wash the base glass between prints and apply lacquer before each print always out of the 3D printer. In case of applying the lacquer inside the 3D printer will lose the warranty.

    ModelSharebot XXL Plus
    ManufacturerSharebot (Italy)
    TechnologyFDM/FFF
    Certificates-
    Printer properties
    Print volume720 x 250 x 200 mm
    Extruders 1
    Filament diameter1.75 mm
    Nozzle diameter available0.4 mm
    ScreenLCD
    Electronics-
    Firmware-
    Filament sensorYes
    Nozzle clog sensor-
    Autolevel-
    Webcam-
    Print properties
    Positioning resolution (XY)60 µm
    Positioning resolution (Z)2.5 µm
    Layer height-
    Max print speed150 cm3/h
    Max extruder temperature230-250ºC
    Max base temperature70-90 ºC
    Max camera temperature-
    Working environment temperature15ºC - 35ºC
    Software and conectivity
    Softwareslic3r
    Compatible filesstl, gcode
    ConectivityUSB, SD Card
    Electrical properties
    Input-
    Output-
    Consumption500 W
    Dimesions and weight
    Printer dimensions955 x 470 x 445 mm
    Printer weight38 kg
    HS Code8477.5900

    Accessories

    28 other products in the same category: