Pellets PVA soporte soluble
search
Compare
You must be logged in to manage your wishlist.

PVA soluble support pellets

3DXTECH-PELLETS-PVA-1KG
185.00 € 185.00 €
Tax excl.
Format
Colour
Quantity

In stock 2 units available for immediate shipping.
units available for shipping in 10 - 15 days Available for shipment within 10 - 15 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 16 September
Available

3DXtech, the renowned North American manufacturer specialising in technical materials for FDM 3D printing, has developed PVA pellets for soluble support.

PVA is a water-soluble material ideal for use as a support material in FDM 3D printing. It is an excellent support material for parts that need support structures for which a 3D printer with a dual extruder or head is required (it is very useful for parts that need cantilevers or bridges).

PVA pellets are small cylinders of the highest quality material. They do not incorporate recycled or reclaimed material. Because of these qualities, PVA pellets are perfect for 3D printing, achieving high print quality.

PVA pellets can be used in the manufacture of filament for FDM 3D printers using Filastruder or any other filament extruder.

With the combination of PVA Pellets and a good filament extruder such as Filastruder, it is possible to obtain 3D printing filament with qualities similar to those of commercial PVA filament.

PVA filament is an ideal choice for use with dual extruder 3D printers, as it can be combined with different polymers such as PLA, PVB, Nylon or TPU and allows the manufacture of parts with overhangs or complex shapes.

When using PVA pellets to manufacture filament with a filament extruder such as Filastruder, it must be taken into account that the extrusion temperature must be regulated in relation to the extrusion speed used. For optimal results, it is recommended to read the product's usage advice.

General information
Manufacturer 3DxTech
Material PVA/BVOH
Format 1000 g
Density 1.23 g/cm³

Mechanical properties
Elongation at break - %
Tensile strength - MPa
Tensile modulus - MPa
Flexural strength - MPa
Flexural modulus - MPa
Surface hardness -

Electrical properties

Thermal properties
Melting temperature - ºC
Softening temperature - ºC
Processing temperature 220 ºC
MFR Ratio -
Glass transition temperature - ºC
Heat deflexion temperature - ºC

Specific properties

Other
HS Code 3901.1

After manufacturing filament with PVA pellets, it can be used as support material in twin-extruder or twin-head FDM 3D printers.

Once the part has been printed with support material, the PVA support material must be removed. To do this, the following steps are recommended:

  1. Remove the excess support material that is accessible by hand. This can significantly reduce the dissolution time.
  2. Immerse the part in hot water. Hot tap water is usually 38-49°C, which is more than adequate to dissolve the filament created from PVA pellets.
  3. Stirring the water is recommended, as this further reduces the dissolving time. This step can be done by mechanical agitation or with an ultrasonic bath system.
  4. When the water cools down, it should be heated or replaced with hot water as long as undissolved carrier material remains.


The residues are ecologically safe and can be disposed of down the house or office drain.

PVA pellets are highly hygroscopic. This means that the material has a tendency to absorb ambient moisture. For this reason, it is recommended to store PVA pellets in an airtight bag or use desiccant bags to prevent them from absorbing moisture. If the material acquires moisture, the filament made from the pellets will not be of optimum quality, and this can have an impact on the print quality.

Related products