Z-GLASS
search
  • Z-GLASS
You must be logged in to manage your wishlist.

Zortrax Z-GLASS

ZORTRAX-ZGLASS-NAT-800
44.00 € 44.00 €
Tax excl.
Diameter
Format
Colour
Quantity

In stock 3 units available for immediate shipping.
units available for shipping in 4 - 8 days
Available for shipment within 4 - 8 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Wednesday 20 November

Zortrax is a Polish company founded in 2013 and focused on the development of professional 3D printing systems. Its main strength is the excellent optimisation and integration between its 3D printers, materials and software. This greatly simplifies the entire printing process, minimising set-up times and reducing the likelihood of failure to a minimum, making them ideal systems for professional environments.

Zortrax offers a wide range of technical materials perfectly optimised for best results in conjunction with its LPD printers, including ABS, ASA, PCABS, Nylon, HIPS and others.

Z-Glass is a PETG-based filament that can be used to print translucent end parts. Z-Glass filament makes it possible to imitate materials such as glass and replace them with a tough thermoplastic. In addition, coating substances such as XTC-3D can be applied to enhance the effect and make the parts even more shiny (see tips for use for more information).

Light bulb printed with Z-Glass

Image 1: 3D printed light bulb in Z-Glass. Source: Zortrax.

Z-GLASS is durable and scratch resistant. In addition, the material withstands exposure to salts, acids, bases and solvents. This makes it ideal for industrial prototyping. In addition, Z-GLASS ensures the accuracy of 3D printed parts thanks to its low shrinkage.

Some of the possible applications for this filament include:

  • Translucent parts.
  • Industrial design prototypes.
  • Automotive parts.
  • Glass imitation parts.
  • Decorative accessories.
  • Parts tested outdoors.
  • Parts that must be resistant to salts, acids, alkalis and solvents.

Prototype printed with Z-Glass

Image 2: Functional prototype for the industrial sector printed with Z-Glass. Source: Zortrax.

Thus, Z-GLASS is a material that can successfully replace glass elements in the creation of functional prototypes, making it an ideal material not only for the industrial sector, but also for the creation of design elements.

General information

Material PETG
Format 800 g
Density (ISO 1183) 1.40 g/cm³
Filament diameter 1.75 mm
Filament tolerance - mm
Filament length (0.8 Kg) ± 237 / (2 Kg) ± 593

Printing properties

Printing temperature 240 ºC
Print bed temperature 80 ºC
Chamber temperature -
Cooling fan -
Recommended printing speed - mm/s

Mechanical properties

Izod impact strength (ISO 180) 2.88 KJ/m²
Elongation at break (ISO 527) 6.74 %
Tensile strength (ISO 527) 39.57 MPa
Tensile modulus 1500 MPa
Flexural strength (ISO 178) 55.4 MPa
Flexural modulus (ISO 178) 1170 MPa
Surface hardness (ISO 868) Shore 72.2 D

Thermal properties

Softening temperature 78 ºC

Specific properties

Transparency -
Chemical resistance

Other

HS Code 3916.9
Spool diameter (outer) - mm
Spool diameter (inner hole) - mm
Spool width - mm

To enhance the translucency effect, coating substances such as XTC-3D can be applied to the surface of parts 3D printed with Z-Glass.

Aplicación de XTC3D

Image 1: XTC3D application. Source: Zortrax.

To achieve an optimal effect, the following steps should be taken:

  1. You will need a model printed with Z-GLASS, XTC-3D, a foam brush, a spoon and a small container.
  2. Mix the two liquids contained in the XTC-3D container.
  3. Then cover the surface of the part with the mixture gradually.
  4. Once dry, you can see that the translucency effect has improved.

Featured properties

Printing temperature
240 ºC
Filament diameter
1.75 mm
Density
1,4 g/cm³

Related products